Trail Grid Pro Alpine Microphone Mount - Toyota Tundra 2007-2021 and Sequoia 2014-2022
Warranty Information
Vendor warranty summary
Trail Grid Pro Warranty
At a glance: 1- or 3-year limited warranty on most products (unless the maker specifies otherwise)
This is Trail Grid Pro's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Most products | 1 or 3 years limited (varies; manufacturer's terms apply where specified) |
| Returns, any reason | 30 days from shipment |
What's covered
- Defective or damaged items under warranty
- Only the specific defective component is replaced
What's not covered
- Cut, spliced or modified wiring
- Improper or third-party installation
- Physical damage such as scratches, dents or drops
- Damaged or punctured speakers
- Misuse or abuse
- Attempts to bypass parking-brake lockouts on Alpine units
How to make a Trail Grid Pro warranty claim
- Log into your Trail Grid Pro account and start a request in the self-service returns portal
- Inspection takes about 2-4 business days
- Contact technical support with questions
Trail Grid Pro contact: Phone: 301.835.9100 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Trail Grid Pro, and help it along either way.
Shop Trail Grid Pro at NVMOS
Tundra JBL Amp Bypass Harness | '14 - '21 Tundra
ZZAIR-PRO 2
Toyota Tacoma 10" Subwoofer Enclosure | '16 - '23 Tacoma
See all Trail Grid Pro products, lead times and FAQs →
Disclaimer: The information on this page describes Trail Grid Pro's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Trail Grid Pro official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Trail Grid Pro is a Toyota-focused parts company in Frederick, Maryland, known for plug-and-play audio upgrades. NVMOS carries its speaker bundles, subwoofer enclosures, amp bypass harnesses, camera kits and brackets for 4Runner, Tacoma, Tundra and Land Cruiser owners who want better sound without cutting factory wiring.
Based in: Frederick, Maryland · Founded: 2021 · Made in: Assembled to order in Maryland · Lead time: Assembled to order; see product page
Shop all 73 Trail Grid ProWarrantyAll brands
Warranty terms are set by Trail Grid Pro, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
If you are fitting an Alpine head unit, the microphone needs somewhere to live, and a dash-mounted stalk is not a great look in a Tundra. This mount from Trail Grid Pro holds an Alpine aftermarket microphone in the factory microphone port of the overhead headliner console, so it sits where Toyota put the original and keeps the cab looking stock.
The mount clips into the console, with the rounded end of the microphone seated near the bottom of the center support. The microphone wire then runs forward along the headliner, across the windshield and down the driver-side A-pillar, so nothing dangles in view.
Fitment
2007-2021 Toyota Tundra and 2014-2022 Toyota Sequoia. Console removal differs by year and trim, and Trail Grid Pro offers separate video guides for 2007-2013 Tundra and for 2014-2021 Tundra and 2014-2022 Sequoia.
Install notes
Open the sunglasses compartment, if equipped, and remove its two T20 Torx screws. Pry off the card holder panel with a plastic tool to reach two more T20 screws. Unplug the console harness, take out the foam insert from the microphone port, push the microphone through the mount and click the mount into the console. Route the wire toward the mirror, down the A-pillar and under the dash. Plug the 3.5mm jack into the microphone port on the back of the radio, then test.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Sequoia build
More parts that fit your Toyota Sequoia and pair well with this one — matched and ready to install.
$11.00
$39.99
$29.99
$19.99
$59.99
More for your Toyota Sequoia
Picked from the 337 parts we carry for the Toyota Sequoia, matched to 2007–2021 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Trail Grid Pro Alpine Microphone Mount FAQs
Is the microphone included?
The listing describes the mount only. Plan on supplying the Alpine microphone.
Which years does it fit?
2007-2021 Tundra and 2014-2022 Sequoia.
Do I need to drill anything?
The install steps do not call for drilling. The mount clips into the factory console where the original microphone port sits.
What tools do I need?
A T20 Torx driver and a plastic pry tool, according to the install steps.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
