Baja S2 Rear Light Plate Mount for Jeep TJ Wrangler
Warranty Information
Vendor warranty summary
GateKeeper Off-Road Warranty
At a glance: Lifetime warranty on Knuckle Pod mounts against structural failure and defects; finish not covered
This is GateKeeper Off-Road's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Knuckle Pod steerable light mounts (structure, materials, workmanship) | Lifetime (original purchaser) |
| Powder coat finish | Not covered |
| Lights and other non-GateKeeper components | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Structural failure of the mount
- Defects in materials or workmanship under normal use
- GateKeeper repairs or replaces at its discretion and pays return shipping on approved claims
What's not covered
- Powder coat: scratches, chips, fading, discoloration, or rust that starts where the finish is damaged
- Lights larger than 2.25 x 2.25 x 2.25 in. or heavier than 12 oz each (using them voids the warranty)
- Modified mounts or incompatible hardware
- Damage to lights or other parts
- Normal wear, improper install, misuse, impacts, collisions or accidents
- Corrosion from the environment or road salt, or neglect
How to make a GateKeeper Off-Road warranty claim
- Email GateKeeper with your order number
- Include photos of the problem and of how the mount is installed
- Add a short description of what happened
- If approved, you cover removal/reinstall and shipping to GateKeeper; they cover shipping back
GateKeeper Off-Road contact: Phone: 209-407-1502 · Email: orders@gatekeeperoffroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to GateKeeper Off-Road, and help it along either way.
Shop GateKeeper Off-Road at NVMOS
Jeep JL / JT Steerable Knuckle Pod Light Mounts
Ford Bronco Steerable Knuckle Pod Light Mounts
Jeep JL / JT Heated Wiper Blades
Disclaimer: The information on this page describes GateKeeper Off-Road's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: GateKeeper Off-Road official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
GateKeeper Off-Road started in a two-car garage in Tracy, California and now machines its parts in-house in San Andreas, California. They're best known for the patented Knuckle Pod steerable light mounts, which bolt to your steering knuckles so your pods turn with the wheels and light up the corners. NVMOS carries their Knuckle Pod mounts plus heated wiper blade kits, hood vents, license plate relocation kits and seat lowering brackets...
Based in: San Andreas, California · Made in: San Andreas, California · Lead time: In-stock ships within 2–5 days
Shop all 43 GateKeeper Off-RoadWarrantyAll brands
Warranty terms are set by GateKeeper Off-Road, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
A rear light plate for the Jeep TJ that holds four Baja Designs S2 flush-mount pods for reverse and scene lighting. It's made from 7-gauge steel and ships bare, ready for your paint or powder coat.
- Fits Jeep Wrangler TJ (1997-2006)
- Holds four Baja Designs S2 flush-mount pods (sold separately)
- 7-gauge steel, ships bare
- Stainless hardware included
This one isn't a bolt-on. It requires cutting the body panel; customers report using a drill, step bit, jigsaw, die grinder and rivet nuts. Plan on a few hours.
Covered by GateKeeper Off-Road's warranty; see the GateKeeper Off-Road warranty summary for details. Not sure it fits? Call real humans at (920) 249-7744 and we'll check fitment before you order.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$99.99
$119.99
$129.99
$199.99
$79.99
More for your Jeep Wrangler
Picked from the 2703 parts we carry for the Jeep Wrangler. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Baja S2 Rear Light Plate Mount for Jeep TJ Wrangler FAQs
Is cutting required?
Yes. Installing the plate means cutting the stock body panel for the light openings.
Which lights fit?
Four Baja Designs S2 flush-mount pods. Lights are sold separately.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
