S&B Replacement 3/8" Pull Through Bolt Kit
Warranty Information
Vendor warranty summary
S&B Filters Warranty
At a glance: Million Mile Limited Warranty; lifetime on S&B Suspension
This is S&B Filters's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Most S&B products (default, incl. lighting) | Million Mile Limited Warranty |
| S&B Suspension (e.g. radius arm drops) | Lifetime (original purchaser) |
| Intake elbows | 5 years |
| Body mounts | Lifetime (original purchaser) |
| Diesel fuel tanks | Lifetime |
| Particle separator electrical / flexible ducting | 3 years / 1 year |
| Competitor (CR-series) air filters | 1 year, manufacturing defects only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Products that fail or prove defective under normal driving
- S&B replaces covered products
- Applies only to products bought from authorized S&B dealers
What's not covered
- Racing or competition use
- Custom modifications or unauthorized changes
- Industrial or marine use, or illegal on-highway applications
- Normal wear, chemical damage and improper installation
- Products from unauthorized dealers or with removed/altered serial numbers
- Consequential, indirect or special damages
How to make a S&B Filters warranty claim
- Call or email S&B customer service
- Send proof of purchase plus photos of the problem
- Get an RMA number before shipping anything back
- Pay return shipping; S&B decides coverage and arranges replacement
S&B Filters contact: Phone: (909) 947-0015 · Email: customerservice@sbfilters.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to S&B Filters, and help it along either way.
Shop S&B Filters at NVMOS
Cold Air Intake For 2021-2026 Ford F-150 3.5L PowerBoost
Cold Air Intake for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 2.7L
S&B Replacement Clear Lid (Hardware Not Included) - AM0388-00
See all S&B Filters products, lead times and FAQs →
Disclaimer: The information on this page describes S&B Filters's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: S&B Filters official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
S&B Filters is a family-owned manufacturer in Fontana, California, that started with cold air intakes. NVMOS carries S&B intakes and filters, intercooler pipes, Ford Super Duty suspension, body mounts and van water tanks for gas and diesel trucks, Toyota trucks and SUVs, and Sprinter, Transit and ProMaster vans.
Based in: Fontana, California · Lead time: In-stock items ship in 24–48 hours
Shop all 584 S&B FiltersWarrantyAll brands
Warranty terms are set by S&B Filters, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is S&B's replacement 3/8 inch pull-through bolt kit. Pull-through bolts are the way you get a bolt into a boxed frame rail where you cannot reach the back side, and this kit includes the pulling wire to do it.
The kit has eight 3/8 inch pull-through bolts with hardware. S&B also puts this same kit in many of its suspension components, such as the Under Frame Traction Bar Mounts and Limit Strap Kits, so this listing is the way to replace a lost or damaged set without buying the whole component again.
Fitment
The listing does not name specific vehicles. It is sold as a replacement for S&B suspension products that use these bolts, so match it to the component you own.
What's included
Eight 3/8 inch pull-through bolts with hardware, and a pulling wire for installing the bolts in a boxed frame.
Install notes
The pulling wire is there for boxed frames, where the bolt is drawn into position from the access point.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
S&B Replacement 3/8" Pull Through Bolt Kit FAQs
What is in the kit?
Eight 3/8 inch pull-through bolts with hardware, plus a pulling wire to install them in a boxed frame.
Which S&B parts use this kit?
S&B says it is included in many of its suspension components, including the Under Frame Traction Bar Mounts and Limit Strap Kits.
Is this the same as part 601151?
Yes. S&B lists 601151 as the former part number.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
