S&B Dual Stabilizer Mount - 2005+ Ford Super Duty F-250/F-350 4x4
Warranty Information
Vendor warranty summary
S&B Filters Warranty
At a glance: Million Mile Limited Warranty; lifetime on S&B Suspension
This is S&B Filters's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Most S&B products (default, incl. lighting) | Million Mile Limited Warranty |
| S&B Suspension (e.g. radius arm drops) | Lifetime (original purchaser) |
| Intake elbows | 5 years |
| Body mounts | Lifetime (original purchaser) |
| Diesel fuel tanks | Lifetime |
| Particle separator electrical / flexible ducting | 3 years / 1 year |
| Competitor (CR-series) air filters | 1 year, manufacturing defects only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Products that fail or prove defective under normal driving
- S&B replaces covered products
- Applies only to products bought from authorized S&B dealers
What's not covered
- Racing or competition use
- Custom modifications or unauthorized changes
- Industrial or marine use, or illegal on-highway applications
- Normal wear, chemical damage and improper installation
- Products from unauthorized dealers or with removed/altered serial numbers
- Consequential, indirect or special damages
How to make a S&B Filters warranty claim
- Call or email S&B customer service
- Send proof of purchase plus photos of the problem
- Get an RMA number before shipping anything back
- Pay return shipping; S&B decides coverage and arranges replacement
S&B Filters contact: Phone: (909) 947-0015 · Email: customerservice@sbfilters.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to S&B Filters, and help it along either way.
Shop S&B Filters at NVMOS
Cold Air Intake For 2021-2026 Ford F-150 3.5L PowerBoost
Cold Air Intake for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 2.7L
S&B Replacement Clear Lid (Hardware Not Included) - AM0388-00
See all S&B Filters products, lead times and FAQs →
Disclaimer: The information on this page describes S&B Filters's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: S&B Filters official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
S&B Filters is a family-owned manufacturer in Fontana, California, that started with cold air intakes. NVMOS carries S&B intakes and filters, intercooler pipes, Ford Super Duty suspension, body mounts and van water tanks for gas and diesel trucks, Toyota trucks and SUVs, and Sprinter, Transit and ProMaster vans.
Based in: Fontana, California · Lead time: In-stock items ship in 24–48 hours
Shop all 584 S&B FiltersWarrantyAll brands
Warranty terms are set by S&B Filters, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
S&B's Dual Stabilizer Mount is built to sharpen steering stability on 2005 and newer Ford Super Duty F-250 and F-350 4x4 trucks. It uses 1/4-inch steel to limit bracket deflection, which lets a pair of steering stabilizers do their job. S&B calls it the most rigid dual stabilizer bracket on the market.
Fitment
Works on 2005+ Super Duty 4x4 trucks with the standard Dana 60 front axle (F-250/F-350). F-450 and F-550 trucks need part 101534 instead. It suits lowered, stock height and lifted applications.
What's included
The kit comes with all mounting hardware, billet clamps and U-bolts.
Install notes
The mount is designed around stabilizers with a 26-inch extended length, 16-inch collapsed length and 10 inches of travel. S&B also offers a matching Fox IFP 985-24-005 stabilizer (S&B part KI9011-00).
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
S&B Dual Stabilizer Mount FAQs
Does it fit an F-450 or F-550?
No. Those trucks need S&B part 101534.
Does it work on a lifted truck?
Yes. S&B lists it for lowered, stock height and lifted applications.
What is included?
All the mounting hardware, billet clamps and U-bolts.
Which stabilizers should I use?
Ones with 26in extended length, 16in collapsed length and 10in of travel. S&B offers a matching Fox IFP 985-24-005.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
