S&B Billet Battery Hold-Down Brackets - 2023-2027 Ford Super Duty 6.7L (Set of 2)
Warranty Information
Vendor warranty summary
S&B Filters Warranty
At a glance: Million Mile Limited Warranty; lifetime on S&B Suspension
This is S&B Filters's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Most S&B products (default, incl. lighting) | Million Mile Limited Warranty |
| S&B Suspension (e.g. radius arm drops) | Lifetime (original purchaser) |
| Intake elbows | 5 years |
| Body mounts | Lifetime (original purchaser) |
| Diesel fuel tanks | Lifetime |
| Particle separator electrical / flexible ducting | 3 years / 1 year |
| Competitor (CR-series) air filters | 1 year, manufacturing defects only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Products that fail or prove defective under normal driving
- S&B replaces covered products
- Applies only to products bought from authorized S&B dealers
What's not covered
- Racing or competition use
- Custom modifications or unauthorized changes
- Industrial or marine use, or illegal on-highway applications
- Normal wear, chemical damage and improper installation
- Products from unauthorized dealers or with removed/altered serial numbers
- Consequential, indirect or special damages
How to make a S&B Filters warranty claim
- Call or email S&B customer service
- Send proof of purchase plus photos of the problem
- Get an RMA number before shipping anything back
- Pay return shipping; S&B decides coverage and arranges replacement
S&B Filters contact: Phone: (909) 947-0015 · Email: customerservice@sbfilters.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to S&B Filters, and help it along either way.
Shop S&B Filters at NVMOS
Cold Air Intake For 2021-2026 Ford F-150 3.5L PowerBoost
Cold Air Intake for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 2.7L
S&B Replacement Clear Lid (Hardware Not Included) - AM0388-00
See all S&B Filters products, lead times and FAQs →
Disclaimer: The information on this page describes S&B Filters's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: S&B Filters official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
S&B Filters is a family-owned manufacturer in Fontana, California, that started with cold air intakes. NVMOS carries S&B intakes and filters, intercooler pipes, Ford Super Duty suspension, body mounts and van water tanks for gas and diesel trucks, Toyota trucks and SUVs, and Sprinter, Transit and ProMaster vans.
Based in: Fontana, California · Lead time: In-stock items ship in 24–48 hours
Shop all 584 S&B FiltersWarrantyAll brands
Warranty terms are set by S&B Filters, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
A battery hold-down lives in a rough neighborhood: engine heat, road salt, moisture and constant vibration. The factory brackets on a Super Duty tend to rust, and a rusty hold-down is the sort of small thing that gets ignored until it becomes a bigger one. The S&B Billet Battery Hold-Down Brackets replace those factory pieces with machined billet aluminum that has a clear anodized finish for corrosion resistance.
The result is a durable bracket that also looks tidy next to the rest of a clean engine bay. It is a straightforward swap with no change to how the battery sits, and the set gives you two brackets so you can handle the job in one go.
Fitment
Built for 2023 and newer Ford Super Duty trucks with the 6.7L Powerstroke diesel. Trucks from 2011 through 2022 use a different bracket, which we list separately under S&B part 72-1000, so check your model year before you order.
What's included
Two billet aluminum hold-down brackets, sold as a set under part number 72-1001.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
S&B Billet Battery Hold-Down Brackets FAQs
Will these fit my 2022 Super Duty?
No. This set is for 2023 and newer trucks. The 2011-2022 version is a separate listing, S&B part 72-1000.
How many brackets come in the box?
The set includes two hold-down brackets.
What is different from the factory brackets?
These are machined from billet aluminum with a clear anodized finish, which is meant to avoid the rust that affects the factory brackets.
Does this fit gas Super Duty trucks?
The listing is for the 6.7L Powerstroke diesel. If you are unsure about your truck, call us and we will check.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
