RCI Roof Rack Extrusion Stiffener Hardware Kit - Universal
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is the replacement hardware kit for the RCI Roof Rack Extrusion Stiffener on the RCI roof rack extrusion stiffeners (no specific vehicle listed). The part number reads as a set of four, which is useful to know if you are replacing hardware across several stiffeners.
It covers the fasteners only. The roof rack extrusion stiffener itself is a separate purchase, and the kit does not change what the part does. It simply gets you back to a complete, correctly bolted install.
Fitment
Listed for the RCI roof rack extrusion stiffeners (no specific vehicle listed). RCI names no vehicle, so the match is to the stiffener rather than a truck. Match it to the RCI part you own before ordering.
What's included
RCI describes this as the full hardware kit for the part named above. It ships at 0.5 lb. Listed as in stock when we added it.
Install notes
RCI gives no install steps for the kit itself. It is a straight swap for the hardware that came with your roof rack extrusion stiffener, so keep the old pieces handy for comparison before you mix anything up.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
RCI Roof Rack Extrusion Stiffener Hardware Kit FAQs
Does this kit include the skid plate or rack itself?
No. It is the hardware kit only. The roof rack extrusion stiffener is sold separately.
What does this fit?
RCI lists no specific vehicle. It is hardware for the RCI roof rack extrusion stiffener, so check that you own that part.
When would I need this?
It makes sense if you bought a used RCI part without its fasteners, misplaced the originals, or are repairing trail damage and need a fresh set.
Is it in stock?
It was listed as in stock when we added it. Call us at (920) 249-7744 if timing matters.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
