RCI Rock Sliders - 2024+ Ford Ranger (Non-Raptor)
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These RCI rock sliders protect the rocker panels and doors of the 2024+ Ranger, and they attach to the frame rather than the body. A full-length 1/4" frame plate with up to 15 mounting points holds each slider, so a rock strike is spread along the frame. They also work as a step.
The build is a 2" square main tube with 1.75" DOM outer rails and 1/4" gussets on all legs. The tube ends are mitered at 45 degrees to follow the body and avoid snagging, the standard angle is 20 degrees, and the rear has RCI's low profile kick-out. RCI says they can hold the whole side of the truck for hi-lift lifting or sliding over rock. Each slider weighs 81 lb, so 162 lb per pair. Built in the USA.
Options
Choose 5 or 20 degrees (20 is standard), satin black powdercoat over epoxy primer or bare metal, and with or without a bolt-on dimpled tread plate. The 5 degree angle gives a flatter step surface.
Fitment
Confirmed on a 2024 Ranger XLT. RCI suspects it fits all non-Raptor 2024 trims but has not confirmed that, so call us if you are on a different trim. They do not fit the Ranger Raptor.
Lead time
Made to order, so these ship on a lead time. RCI posts current lead times on its site.
Install notes
Direct bolt-on to existing mounting locations, no drilling, basic hand tools. Grade 5 and 8 hardware is included where applicable.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Ranger build
More parts that fit your Ranger and pair well with this one — matched and ready to install.
$1,399.00
$1,799.99
$69.99
$99.99
$59.99
More for your Ford Ranger
Picked from the 264 parts we carry for the Ford Ranger, matched to 2024+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Rock Sliders FAQs
Do these fit the Ranger Raptor?
No. The vendor states they do not fit the Raptor.
Which trims are confirmed?
Fitment is confirmed on a 2024 Ranger XLT. RCI suspects the other non-Raptor trims fit but has not confirmed them, so check with us if you are unsure.
Do they need drilling?
No. They bolt to existing mounting locations with basic hand tools.
How heavy are they?
81 lb each, 162 lb for the pair.
How long until they ship?
They are made to order and ship on a lead time. RCI posts current lead times, or call us to check.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
