RCI Rock Sliders - 2023+ Toyota Sequoia
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
These RCI rock sliders shield the rocker panels and doors on the 3rd generation Sequoia from trail damage and debris. A full-length 3/16" frame mounting plate and a five-leg design tie each slider into the frame, so the load goes there rather than into the body. They are also rated to support the vehicle's weight for hi-lift use or sliding over rock.
The main tube is 2" square with 1.75" DOM outer rails as standard and 1/4" gussets on all four legs. The tube ends are mitered to give a finished look along the body, the angle is a fixed 5 degrees for ground clearance with a low profile, and the rear has RCI's low profile kick-out. The finish is black textured powdercoat over epoxy primer, applied in-house. Built in the USA.
Options
Choose satin black powdercoat or bare metal, with or without a bolt-on dimpled tread plate. The tread plate adds grip, helps kids and pets get in, and shields the rocker from rocks thrown by the tires.
Fitment
Listed for the 2023-present Toyota Sequoia.
Lead time and shipping
Made to order, so these ship on a lead time. RCI posts current lead times on its site, and we can check the current wait for you. Sequoia sliders ship via FedEx Freight.
Install notes
Bolts onto existing factory mounting points with no drilling, using basic hand tools. All necessary grade 5 and 8 hardware is included.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Sequoia build
More parts that fit your Toyota Sequoia and pair well with this one — matched and ready to install.
$1,399.00
$499.00
$85.99
$85.99
$85.99
More for your Toyota Sequoia
Picked from the 337 parts we carry for the Toyota Sequoia, matched to 2023+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Rock Sliders FAQs
Will they fit the older Sequoia?
No. This listing is for the 2023-present Sequoia. The 2008-2022 truck has its own RCI slider.
Do I need to drill?
No. They bolt to existing factory mounting points with basic hand tools.
How do they ship?
Sequoia sliders ship via FedEx Freight.
How long until they ship?
They are made to order and ship on a lead time. RCI posts current lead times, or call us to check.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
