RCI Rock Sliders - 2021+ Ford Bronco 4-Door
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
RCI's Bronco rock sliders bolt to the frame instead of the body, so an impact on the trail goes into the frame rather than bending sheet metal. The main rail is 2" square tube with 1.75" DOM outer rails, a full-length 3/16" frame plate, a five-leg layout and 1/4" gussets on all five legs. The end caps are laser cut, bent and mitered 3/16" steel, and the rear uses RCI's low profile kick-out. Built in the USA.
RCI says the sliders can carry the whole side of the truck for hi-lift lifting or sliding on rock. The standard 20 degree angle keeps them tucked up for ground clearance, and a 5 degree version is available for a flatter step.
Options
Pick 5 or 20 degrees, satin black powdercoat over epoxy primer or bare metal, and with or without the bolt-on dimpled tread plate. If you add the tread plate, RCI recommends the 5 degree angle.
Fitment
Fits all 2021-present 4WD four-door Broncos, Raptor included. For the two-door, see the separate 2-door listing.
Install notes
Direct bolt-on to existing mounting locations, no drilling, with basic hand tools. Hardware is included, grade 5 and 8 where applicable.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
$1,199.00
$49.99
$39.99
$39.99
$49.99
More for your Ford Bronco
Picked from the 643 parts we carry for the Ford Bronco, matched to 2021+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Rock Sliders FAQs
Do these fit the Bronco Raptor?
Yes. RCI states they fit all 2021-present 4WD four-door Bronco models, Raptor included.
Is there a version for the 2-door?
Yes, RCI lists a separate 2-door rock slider. This listing is the 4-door only.
Which angle should I pick?
20 degrees is standard and gives the most ground clearance. If you add the tread plate, RCI recommends 5 degrees for a flatter step.
Does installation need drilling?
No. They bolt to existing mounting locations with basic hand tools, and all hardware is supplied.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
