RCI Rock Sliders - 2018+ Jeep Wrangler JLU
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These RCI rock sliders protect the rocker panels and doors on a four-door Wrangler JLU, and they are built to take a real hit. Each side uses a full-length 3/16" frame plate and a support leg design, with a 2" square main tube, 1.75" DOM outer rails and 1/4" gussets on every leg. The end caps are laser cut, bent and mitered 3/16" steel rather than a square-cut tube end, and the rear has RCI's low profile kick-out.
RCI says the sliders can support the whole side of the vehicle for hi-lift lifting or sliding over rocks. Each slider weighs 62 lb (124 lb per pair), and the optional tread plates add 3.5 lb each.
Options
Pick a slider angle of 5, 20 (standard) or 45 degrees, satin black powdercoat over epoxy primer or bare metal, and with or without a bolt-on dimpled tread plate. The tread plate is offered on the 5 and 20 degree versions, and RCI recommends 5 degrees if you want a flatter step.
Fitment
Verified on the 2018+ JLU Rubicon and listed for the 2018-present Wrangler JLU, including the 4xe. RCI also suggests adding its pinch seam covers for a finished look along the rocker.
Lead time
Made to order, so these ship on a lead time that depends on current production. RCI posts current lead times on its site.
Install notes
Direct bolt-on to the factory attachment points with no drilling, using basic hand tools. They can also be welded to the frame if you prefer. All hardware is provided.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$1,049.00
$499.00
$559.00
$89.00
$119.00
More for your Jeep Wrangler
Picked from the 6389 parts we carry for the Jeep Wrangler, matched to 2018+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Rock Sliders FAQs
Will these fit a JLU 4xe or Rubicon?
Yes. RCI verified fitment on the 2018+ JLU Rubicon and states they fit the Wrangler JLU 4xe.
Which angle should I choose?
20 degrees is the standard and sits lowest for ground clearance. 5 degrees is the one RCI recommends if you add the tread plate, since it gives a flatter step. 45 degrees is also offered.
Do I have to drill into the frame?
No. They bolt to existing factory attachment points. They can be welded to the frame if you want, but that is optional.
How long do they take to ship?
They are made to order and ship on a lead time. RCI posts current lead times, or call us to check.
What are pinch seam covers?
RCI suggests them alongside the sliders for a finished look on the rocker panel. They are a separate item.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
