RCI Rock Sliders - 2015-2022 Chevy Colorado
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
The rocker panel is the part of a Colorado most likely to meet a rock, and replacing one is not cheap. These RCI sliders mount to the frame through full-length 1/4" frame plates with up to 15 mounting points per side, so the load is spread along the frame rather than concentrated in the body. They still work as a step around the parking lot.
The build is a 2" square main tube, 1.75" DOM outer rails and 1/4" gussets on all legs. The main tube ends are mitered at 45 degrees so they follow the body and are less likely to hang up, and the rear has RCI's low profile kick-out. RCI says they can support the truck's whole side for hi-lift lifting or sliding on rocks. Built in the USA.
Options
The standard angle is 20 degrees, with a 5 degree version available. Pick satin black powdercoat over epoxy primer or bare metal, with or without a bolt-on dimpled tread plate. RCI recommends 5 degrees if you add the tread plate.
Fitment
Designed for the 2015-2022 Chevy Colorado.
Lead time
Made to order, so these ship on a lead time. RCI posts current lead times on its site.
Install notes
Direct bolt-on to existing mounting locations, no drilling, basic hand tools. Grade 5 and 8 hardware is provided where applicable.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Chevrolet Colorado build
More parts that fit your Chevrolet Colorado and pair well with this one — matched and ready to install.
$1,299.00
$11.99
$16.99
$409.00
$419.00
More for your Chevrolet Colorado
Picked from the 206 parts we carry for the Chevrolet Colorado, matched to 2015–2022 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Rock Sliders FAQs
Do these fit the newer 2023+ Colorado?
No. This listing is designed for the 2015-2022 Colorado.
Is drilling required?
No. They bolt to existing mounting locations and install with basic hand tools.
Which angle is better?
20 degrees is standard and gives the most ground clearance. With the tread plate, RCI recommends 5 degrees for a flatter step.
Are they in stock?
They are made to order and ship on a lead time. RCI posts current lead times, or call us and we will check.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
