RCI Rock Sliders - 2008-2022 Toyota Sequoia
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
A Sequoia is a long, heavy vehicle with a lot of exposed rocker panel, and these RCI sliders mount directly to a full-length frame support plate with multiple reinforced bolt points. That puts the load in the frame, not the body, and the sliders double as a sturdy step in a busy parking lot.
The main tube is 2" square with 1.75" DOM outer rails as standard and 1/4" gussets on the mounting legs, backed by a full-length 3/16" frame plate. The tube ends are mitered to follow the body lines, the angle is a fixed 5 degrees for ground clearance, and the rear has RCI's low profile kick-out. RCI says they can handle the full weight of the vehicle for hi-lift recovery and sliding over rock. The finish is black textured powdercoat over epoxy primer. Built in the USA.
Options
The angle is a fixed 5 degrees. Pick satin black powdercoat over epoxy primer or bare metal, with or without the bolt-on dimpled tread plate for a better step surface and extra shielding from tire throw.
Fitment
Fits the 2008-2022 Toyota Sequoia.
Availability
The vendor lists these as in stock. Sequoia sliders ship via FedEx Freight.
Install notes
Direct bolt-on to existing mounting locations with no drilling, using basic hand tools. Hardware is included, grade 5 and 8 where applicable.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Sequoia build
More parts that fit your Toyota Sequoia and pair well with this one — matched and ready to install.
$1,119.00
$36.00
$39.99
$29.99
$19.99
More for your Toyota Sequoia
Picked from the 372 parts we carry for the Toyota Sequoia, matched to 2008–2022 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Rock Sliders FAQs
Are these in stock?
The vendor lists them as in stock.
How do they ship?
Sequoia sliders ship via FedEx Freight.
Can I use them to jack the truck up?
RCI says they are built to take the full vehicle weight for hi-lift recovery.
Do I need to drill?
No. They bolt to existing mounting locations and install with basic hand tools.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
