RCI Pike Front Bumper - 2022+ Toyota Tundra
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Pike is RCI's lighter front bumper for the 3rd generation Tundra. It keeps the truck's aggressive look and adds recovery points, a winch mount and light bar attachment, and it follows the contours for a sleek fit and finish.
The built-in winch plate ties directly into the frame and accommodates winches up to 10,000 lb, including the larger Warn ZEON housing, and winch support reinforcement brackets are included. The frame mounts and substructure are fully gusseted, and the 3/4" shackle mounts run through the shell and weld to the frame mounts and shell. It works with the OEM fog lights and all sensors, is compatible with the adaptive cruise control sensor, and works with the TRD engine skid plate and OEM skid. It takes most 6" single-row light bars. The bumper is 3/16" steel and weighs 73 lb, finished in satin black powdercoat over epoxy primer. Built in the USA.
Options
Choose satin black powdercoat or bare metal.
Fitment
Listed for the 2022-present Toyota Tundra. There is a limitation on trucks with the air dam or front dynamic spoiler: installing the bumper means removing the air dam module, which then shows a persistent error on the dash display. In RCI's testing it did not cause limp mode. To avoid the error, the module is relocated onto the winch plate, which prevents effective use of a winch on air dam equipped trucks. RCI says it is developing a solution.
Availability
The vendor lists this as in stock.
Install notes
Bolts onto existing factory attachment points with no drilling or welding, but the OEM plastic bumper does have to be trimmed.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Tundra build
More parts that fit your Toyota Tundra and pair well with this one — matched and ready to install.
$1,249.00
$416.90
$315.00
$82.80
$184.00
More for your Toyota Tundra
Picked from the 1197 parts we carry for the Toyota Tundra, matched to 2022+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Pike Front Bumper FAQs
Does it fit trucks with the air dam (front dynamic spoiler)?
Compatibility is limited. The air dam module has to be removed, which causes a dash error, and relocating it to the winch plate prevents effective winch use. RCI says a fix is in development.
Will it keep the adaptive cruise control sensor?
Yes. It is compatible with the adaptive cruise control sensor and the OEM sensors and fog lights.
Do I have to trim the factory bumper?
Yes. No drilling or welding, but the OEM plastic bumper must be trimmed.
Is it in stock?
The vendor lists it as in stock.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
