RCI Low-Pro Bed Bars
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
RCI's Low-Pro Bed Bars are a stripped-down alternative to a full bed rack. Two adjustable cross-members span the bed and sit on four legs, spreading load across the bed rails with a high weight capacity. The bars are only 3.5" tall from the rail, so they keep gear low, stay below the roofline when a roof top tent is mounted, and leave the bed open. You can slide each bar as far apart as 58" front to back. Slotted mounting points on top accept nearly any roof top tent.
Fitment
Adjusts to any truck bed from 54" to 69" between the rails, from a Chevy Colorado to a Dodge 3500. Choose 5 ft (46") or 6 ft (58") length, and a mounting option: adapter kits for 2005-2015 Tacoma, 2016-2023 Tacoma, 2024+ Tacoma, 07+ Tundra and Jeep Gladiator, or 22+ Nissan Frontier, universal drill-free C-clamps, or none. The C-clamps are not compatible with the RCI Tonneau Adapter or accessory rail systems.
What's included
Four bed bar legs, two adjustable cross-members, two Z brackets and a hardware kit.
Install notes
Bolts to the inside of the bed rails, or use the optional drill-free clamps. Assembly takes about 15 minutes with basic hand tools. The finish is black textured powdercoat over epoxy primer. Made in the USA.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
RCI Low-Pro Bed Bars FAQs
What is included?
Four bed bar legs, two adjustable cross-members, two Z brackets and a hardware kit.
Will it fit my truck?
It adjusts to beds from 54" to 69" between the rails. Choose the length that matches your bed and your mounting option.
Can I avoid drilling?
Yes, with the optional drill-free C-clamps. They do not work with accessory rail systems or the RCI Tonneau Adapter.
Will it carry a roof top tent?
Yes, it is designed to accept roof top tents and other heavy gear.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
