RCI HD Truck Bed Molle Panel - 2005-2023 Toyota Tacoma
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This RCI Offroad bed-side MOLLE panel turns the wall of your Tacoma bed into usable storage. It carries a standard MOLLE/PALS grid, so tactical pouches, Quick Fist clamps, fire extinguishers and recovery gear clip right on, and it is pre-drilled to take 2-gallon Rotopax fuel or water containers. Getting gear off the bed floor leaves the middle open for lumber, a dirt bike or whatever else needs the room. Made in the USA.
It mounts under the factory accessory rail, so you keep the OEM bed cleats and tie-downs, and RCI says it works with most tonneau covers.
Fitment
Made for the 2005 to 2023 (2nd and 3rd generation) Toyota Tacoma. Choose Passenger or Driver side for the orientation you want.
Install notes
Installation is fully bolt-on at factory mounting points with no drilling or permanent modification. An installation guide is available from the vendor.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota Tacoma build
More parts that fit your Toyota Tacoma and pair well with this one — matched and ready to install.
$143.00
$69.00
$679.00
$469.00
$1,649.00
More for your Toyota Tacoma
Picked from the 1669 parts we carry for the Toyota Tacoma, matched to 2005–2023 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI HD Truck Bed Molle Panel FAQs
Which Tacomas does this fit?
2005 to 2023, covering the 2nd and 3rd generation. For 2024 and newer, use the 2024+ panel.
Do I have to drill my bed?
No. It uses factory mounting points.
Can I still use my bed cleats?
Yes. It mounts under the OEM accessory rail.
Does it fit with a tonneau cover?
RCI says it is compatible with most tonneau covers.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
