RCI Hardware Kit for Toyo Bed Rack Adapter
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
This is a replacement hardware kit from RCI for the Toyo bed rack adapter. It is a fasteners-only listing: the rack, bars or mounts itself is not part of the kit. It exists for the usual reasons a bolt bag goes missing: you picked up a secondhand RCI piece without its hardware, lost a fastener during removal, or are repairing something after a hard day on the trail.
Buying the correct kit beats rummaging through a coffee can of mismatched bolts, especially on a part that carries load or protects something expensive. The vendor lists it as a complete hardware kit for this specific RCI product, in stock, with a shipping weight of 0.4 lb.
Fitment
This kit is not tied to a specific vehicle. It goes with the RCI product it is named for (toyo bed rack adapter), so match it to the RCI part you are repairing or rebuilding.
What's included
One complete hardware kit for the Toyo bed rack adapter. The vendor does not break the kit down into individual fastener counts or sizes, so if you need to confirm a specific bolt before ordering, ask us and we will check with the factory.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
RCI Hardware Kit for Toyo Bed Rack Adapter FAQs
Does this kit include the rack, bars or mounts itself?
No. It is a hardware kit only, listed as the full hardware for the Toyo bed rack adapter. The main part is sold separately.
When would I need this kit?
The vendor positions it for three cases: you bought a secondhand RCI product without its hardware, you misplaced the fasteners, or you are repairing damage from the trail.
Which products does this kit go with?
It is a universal listing for the Toyo bed rack adapter. Use it with that RCI product. If you are not sure which RCI part you have, call or email us and we will help sort it out.
Can you tell me exactly what fasteners are in the kit?
The vendor lists it as a full hardware kit but does not publish a fastener-by-fastener count. Reach out and we will confirm before you order.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
