RCI Bed Rack Risers 2" - Set of 6
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Sometimes a bed rack needs a little more height to clear a tonneau, a tent mount or the gear stacked on top. This RCI Metalworks kit gives you six 2" riser brackets that lift whatever sits on the rack by 2". They are cut from 10 gauge steel and finished in a heavy-duty two-stage powder coat over primer, which RCI describes as an OEM-quality finish. Made in the USA.
Why it works
- 2" of lift: raises accessories, tents and other gear mounted to a bed rack.
- Set of six: enough brackets for multiple mounting points.
- 10 gauge steel: with a two-stage powder coat over primer.
- Hardware included: everything needed for installation is in the kit.
Fitment
The listing does not name a specific rack or vehicle, so check that your rack's mounting pattern suits before ordering, and call us if you are unsure.
In the box
Six 2" riser brackets and all hardware needed for installation. Shipping weight is 5.7 lb.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
RCI Bed Rack Risers 2" FAQs
How many risers come in the kit?
Six 2" riser brackets.
What are they for?
They raise accessories, tents and other gear on a bed rack by 2".
Is hardware included?
Yes, all hardware for installation is included.
Which bed racks do they fit?
The vendor does not list specific racks, so confirm with us if you have a particular rack in mind.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
