RCI Arapaho Series Front Bumper - 2021+ Ford Bronco
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Arapaho keeps the 6th generation Bronco's look while adding recovery points, a winch mount and light bar attachment. It is a modular design, with bolt-on end caps so it can match the contours of the truck for your fender setup.
A built-in winch plate ties into the frame and accepts winches up to 10,000 lb, including the larger Warn ZEON 10S. The frame mounts and substructure are fully gusseted, and the 3/4" shackle mounts run through the shell and are welded to the frame mounts and the shell. There are integrated zip tie tabs and cutouts for tidy wiring inside the bumper, and it takes most 6" light bars or pairs of 2" x 3" pods. It retains the factory parking sensors. The bumper is 3/16" steel and weighs 89 lb, finished in satin black powdercoat over epoxy primer. Built in the USA.
Options
Choose satin black powdercoat or bare metal, and a fender style of Base, Sasquatch or None (fender delete). The Raptor end caps are listed as coming soon.
Fitment
Compatible with all 2021-present Bronco trim levels and the OEM bumper configurations: plastic, Capable and Modular. Trucks with Adaptive Cruise Control need aftermarket relocation brackets.
Lead time
Made to order, so these ship on a lead time. RCI posts current lead times on its site, and we can check the current wait for you.
Install notes
Bolts onto existing factory attachment points with no drilling, welding or modification required.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
$1,359.00
$169.00
$1,369.00
$459.00
$565.00
More for your Ford Bronco
Picked from the 1160 parts we carry for the Ford Bronco, matched to 2021+ model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI Arapaho Series Front Bumper FAQs
Does it work with Adaptive Cruise Control?
Trucks with ACC need aftermarket relocation brackets for the radar.
Does it keep the parking sensors?
Yes, the factory parking sensors are retained.
Which fender setup should I pick?
Choose Base, Sasquatch or None (fender delete) in the options to match your truck. Raptor end caps are listed as coming soon.
What is the difference from the Kingston bumper?
The Arapaho has a built-in winch plate and takes 6" light bars or 2" x 3" pods. The Kingston is listed for recovery points and lighting, with a 30" light bar mount.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
