RCI 12" Adjustable Sport Bed Rack - Universal Truck Fit
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The 12" Sport Bed Rack is RCI's lower-priced take on its heavy duty adjustable rack. It is made to mount on pretty much any pickup bed, from a Colorado-sized bed to a 3500, and the width adjusts to suit. It stands 12" above the bed rails, which keeps rear window visibility good and keeps a rooftop tent mostly below the roofline, cutting the drag those tents usually add.
A two crossmember design handles a rooftop tent and heavy gear, and built-in mounting points take lights, Hi-Lift jacks, bikes, traction boards, shovels, awnings, fuel and water cans or a spare tire. Slotted mounts on top accept nearly any rooftop tent as a direct bolt-on. If you need the maximum weight capacity, RCI points you to its HD adjustable racks instead. Black textured powdercoat over an epoxy primer. Made in the USA.
Fitment
Adjusts to beds from 55.25" to 64" between the bed rails, including tapered beds. Pick one of three lengths for 5-foot beds up to 6-foot-plus beds.
What's included
The rack, two top braces that can be placed anywhere across the width, and all installation hardware.
Install notes
Bolt-together assembly in about 30 to 45 minutes with basic hand tools. It bolts inside the bed rails, or use optional drill-free clamps topper-style (not applicable with accessory rail systems).
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
RCI 12" Adjustable Sport Bed Rack FAQs
Will it fit my truck?
The width adjusts from 55.25" to 64" between the bed rails, including tapered beds, and there are three length options.
Can it carry a rooftop tent?
Yes. The slotted top mounts accept nearly any rooftop tent. For maximum weight capacity, RCI suggests its HD adjustable racks.
Do I have to drill my bed?
It bolts to the inside of the bed rails. Optional drill-free clamps are available for a topper-style mount.
What is included?
The rack, two top braces and all hardware.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
