2021-2024 RAM TRX & 2025 RHO Center Console Molle Panels & Digital Device Bridge
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 325 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Addictive Desert Designs Center Console Molle Panels & Digital Device Bridge — 2021-2024 Ram TRX & 2025 Ram RHO
This kit adds driver and passenger molle panels to the sides of the TRX or RHO center console, plus a device bridge plate that spans the console for phones, tablets or a GPS.
The panels use PEM nuts for 10-24 accessory bolts and AMPS-standard hole spacing, so common mounting systems bolt straight on. Installation requires drilling and riv nuts. Once in, it does not interfere with seat adjustment, and the shifter, cup holders, wireless charger and storage stay accessible.
| Spec | Detail |
|---|---|
| Fitment | 2021-2024 Ram 1500 TRX; 2025 Ram 1500 RHO |
| Not compatible | Standard Ram 1500 |
| Part number | AC6202201NA |
| Includes | Driver and passenger molle panels; device bridge plate |
| Hardware | PEM nuts for 10-24 accessory bolts |
| Hole spacing | 1.9 in / 48.5 mm (AMPS standard) |
| Finish | Dual-stage hammer black powder coat |
| Install | Drilling and riv nuts required |
| Made in | USA |
Will it fit a standard Ram 1500?
No. ADD states it will not fit the standard Ram 1500; it is for the 2021-2024 TRX and 2025 RHO.
Is drilling required?
Yes. Drilling and riv nuts are required for installation.
Are device holders included?
No. The bridge is drilled for AMPS-pattern mounts such as Ram Diamond bases, Bulletpoint and Quad Lock; holders are sold separately.
Will it block the shifter or charger?
No. The shifter, cup holders, wireless charger and storage stay accessible, and it does not interfere with seat adjustment.
Install guides & documents
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
