Race Series F-150/Raptor Chase Rack
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 325 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ADD Race Series R Chase Rack — Ford F-150 & Raptor
The Race Series R chase rack is ADD's answer to lighting for night runs in the desert. Up front, an actuator raises and lowers a forward-facing 50-inch LED bar mount, so the bar tucks away when it is not in use. Out back, dually mounts take rear-facing lights.
It is built from .120-wall steel tubing with 1/8-inch aluminum panels, finished in hammer black with satin black panels, and it bolts on directly with no cutting. Made in the USA.
| Spec | Detail |
|---|---|
| Brand | Addictive Desert Designs (ADD Offroad) |
| Fitment | 2004-2023 Ford F-150 (including 2011-2014 EcoBoost); 2010-2014 Raptor; 2017-2023 F-150 Raptor and Raptor R |
| Front lighting | Actuated mount for a front-facing 50" LED bar |
| Rear lighting | Rear-facing dually mounts |
| Tubing | .120 wall steel |
| Panels | 1/8" aluminum |
| Finish | Hammer black powder coat, satin black powder coat panels |
| Install | 100% direct bolt-on |
| Made in | USA (Chandler, Arizona) |
| Part number | C115802800103 |
Which trucks does it fit?
ADD lists Ford F-150 from 2004 through 2023, the 2010-2014 Raptor, and the 2017-2023 F-150 Raptor and Raptor R. It is not listed for 2024 and newer trucks.
What does the actuator do?
It raises and lowers the front-facing 50-inch LED bar so you can stow it when it is not in use.
Is the light bar included?
ADD describes the mount for a Rigid Industries 50-inch LED bar but does not state that the bar is included.
Does it require drilling or welding?
No. ADD describes it as 100 percent direct bolt-on.
Videos
Install guides & documents
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
