Pro Comp SS6 Six-Way Touchscreen Switch Panel
Warranty Information
Vendor warranty summary
Pro Comp Warranty
At a glance: Lifetime structural warranty on alloy wheels (on-road use, original buyer); 2 years on finishes; lifetime Pro Comp Promise on suspension
This is Pro Comp's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 28, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Alloy wheel structure (on-road use) | Lifetime, original buyer |
| Powder-coat finishes (gloss, flat, matte black) | 2 years |
| Chrome and PVD finishes | 2 years |
| Polished finishes | Not covered |
| Steel wheels (listed under finish) | 2 years |
| Suspension, shocks and steering stabilizers (Pro Comp Promise) | Lifetime, repair or replace |
| Bushings, bump stops, ball joints, tie rod ends, heim joints | 1 year (wear items) |
| Leaf and coil springs (sagging) | 5 years |
| MX Series coilovers (leakage) | 1 year |
| Suspension finish | 90 days |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Alloy wheel structural defects for life, on-road use, original buyer
- Wheel finish defects for two years on powder coat, chrome and PVD
- Suspension parts that fail under normal use, under the Pro Comp Promise
- Optional Lift Shield powertrain coverage on qualifying lift kits installed by an authorized installer
What's not covered
- Bends, dents, scratches, chips and other impact damage
- Improper installation or application, accidents and potholes
- Finish damage from neglect or harsh cleaning chemicals
- Polished wheel finishes
- Freight, labor, loss of use and consequential damage
- Shipping damage reported more than 10 days after delivery
- Second owners (the warranty does not transfer)
How to make a Pro Comp warranty claim
- Contact the retailer you bought from
- Pro Comp issues a return authorization number, valid for 60 days
- Ship the part prepaid with your contact details, where and when you bought it, and a description of the problem
- Pro Comp inspects it; covered items are replaced and shipped back prepaid
Pro Comp contact: Phone: 800-776-0767 · Email: info@procompusa.com · Pro Comp contact page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Pro Comp, and help it along either way.
Shop Pro Comp at NVMOS
See all Pro Comp products, lead times and FAQs →
Disclaimer: The information on this page describes Pro Comp's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Pro Comp official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Pro Comp has been building truck and Jeep suspension since 1985 and added wheels in 2001. Today it sells value-priced cast off-road wheels alongside lift kits backed by its lifetime Pro Comp Promise.
Based in: Ogden, Utah · Since: 1985 · Lead time: In stock: ships in 24–48 hours
Shop all 76 Pro CompWarrantyAll brands
Warranty terms are set by Pro Comp, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Pro Comp SS6 Six-Way Touchscreen Switch Panel
The Pro Comp EXP76201 SS6 puts six 12V circuits on one touchscreen. Run light bars, pods, rock lights, an air compressor or a horn from a single panel instead of a dash full of rocker switches, each with its own relay and fuse. The solid state control box handles switching and protection, so you skip buying separate relays, fuses and leads for every accessory.
The touch panel is glass in an aluminum housing, waterproof and small enough (3.5 x 2.5 x 0.375 inches) to mount on the dash, a console, an A-pillar pod or the headliner. Each button backlights red when off and blue when on, and Pro Comp includes 24 laser-engraved adhesive labels so you can mark each circuit. Weatherproof OEM-style connectors tie the panel, control box and accessories together. It is designed for 12V systems. Pro Comp covers it with a limited lifetime warranty. See the full Pro Comp lineup and the Pro Comp warranty summary.
| Spec | Detail |
|---|---|
| Part number | EXP76201 |
| Circuits | 6 |
| Panel | Glass touchscreen, aluminum housing |
| Panel size | 3.5" W x 2.5" H x 0.375" D |
| Backlighting | Red off, blue on |
| Input voltage | 12V DC |
- Touchscreen switch panel
- Solid state control box
- Weatherproof wiring harness
- 24 laser-engraved adhesive labels
Questions about wiring it into your rig? Call or text us at (920) 249-7744.
Specifications
Pro Comp SS6 Six-Way Touchscreen Switch Panel FAQs
Do I need separate relays and fuses?
No. The solid state control box handles switching for all six circuits, which is the point of the SS6.
Is the panel waterproof?
Pro Comp describes the glass and aluminum touchscreen as waterproof, with weatherproof OEM-style connectors.
Will it work on a 24V system?
Pro Comp lists it for 12V systems.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com


















