Pro Comp S4-R 2x2 Round LED Pods, Spot Beam (Pair)
Warranty Information
Vendor warranty summary
Pro Comp Warranty
At a glance: Lifetime structural warranty on alloy wheels (on-road use, original buyer); 2 years on finishes; lifetime Pro Comp Promise on suspension
This is Pro Comp's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 28, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Alloy wheel structure (on-road use) | Lifetime, original buyer |
| Powder-coat finishes (gloss, flat, matte black) | 2 years |
| Chrome and PVD finishes | 2 years |
| Polished finishes | Not covered |
| Steel wheels (listed under finish) | 2 years |
| Suspension, shocks and steering stabilizers (Pro Comp Promise) | Lifetime, repair or replace |
| Bushings, bump stops, ball joints, tie rod ends, heim joints | 1 year (wear items) |
| Leaf and coil springs (sagging) | 5 years |
| MX Series coilovers (leakage) | 1 year |
| Suspension finish | 90 days |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Alloy wheel structural defects for life, on-road use, original buyer
- Wheel finish defects for two years on powder coat, chrome and PVD
- Suspension parts that fail under normal use, under the Pro Comp Promise
- Optional Lift Shield powertrain coverage on qualifying lift kits installed by an authorized installer
What's not covered
- Bends, dents, scratches, chips and other impact damage
- Improper installation or application, accidents and potholes
- Finish damage from neglect or harsh cleaning chemicals
- Polished wheel finishes
- Freight, labor, loss of use and consequential damage
- Shipping damage reported more than 10 days after delivery
- Second owners (the warranty does not transfer)
How to make a Pro Comp warranty claim
- Contact the retailer you bought from
- Pro Comp issues a return authorization number, valid for 60 days
- Ship the part prepaid with your contact details, where and when you bought it, and a description of the problem
- Pro Comp inspects it; covered items are replaced and shipped back prepaid
Pro Comp contact: Phone: 800-776-0767 · Email: info@procompusa.com · Pro Comp contact page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Pro Comp, and help it along either way.
Shop Pro Comp at NVMOS
See all Pro Comp products, lead times and FAQs →
Disclaimer: The information on this page describes Pro Comp's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Pro Comp official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Pro Comp has been building truck and Jeep suspension since 1985 and added wheels in 2001. Today it sells value-priced cast off-road wheels alongside lift kits backed by its lifetime Pro Comp Promise.
Based in: Ogden, Utah · Since: 1985 · Lead time: In stock: ships in 24–48 hours
Shop all 76 Pro CompWarrantyAll brands
Warranty terms are set by Pro Comp, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Pro Comp S4-R 2x2 Round LED Pods, Spot Beam (Pair)
The Pro Comp EXP76412P is a pair of compact round S4-R pods with a spot beam. Each pod uses four 5W CREE 6000K LEDs, and Pro Comp rates output at 1,920 lumens. They draw about 1.32 amps at 12V and run on 9 to 32 volts.
Small round pods are an easy add for A-pillar mounts, a hood-hinge bracket or the corners of a bumper, and the spot pattern pushes light out past your headlights. The housings are cast aluminum with a shockproof polyester powder coat and polycarbonate lenses, sealed to IP67. The pair ships with stainless mounting brackets, hardware and a universal relay harness, so there is nothing else to buy to get them working. Pro Comp covers them with a limited lifetime warranty. See the full Pro Comp lineup and the Pro Comp warranty summary.
| Spec | Detail |
|---|---|
| Part number | EXP76412P |
| Quantity | Pair |
| Beam | Spot |
| LEDs | 4x 5W CREE 6000K per pod |
| Output | 1,920 lumens |
| Current | 1.32A @ 12V, 0.66A @ 24V |
| Input voltage | 9-32V DC |
| Rating | IP67 |
| Operating temp | -40F to 145F |
- Two S4-R round pods
- Stainless mounting brackets and hardware
- Universal relay harness
Questions? Call or text us at (920) 249-7744.
Specifications
Pro Comp S4-R 2x2 Round LED Pods, Spot Beam (Pair) FAQs
Is wiring included?
Yes. The pair comes with a universal relay harness, brackets and hardware.
Is it a pair?
Yes, two pods.
Spot or flood?
Spot, for reach past your headlights.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com













