Pro Comp Motorsports Series DS-7 7" Round LED Light, Combo Beam (Each)
Warranty Information
Vendor warranty summary
Pro Comp Warranty
At a glance: Lifetime structural warranty on alloy wheels (on-road use, original buyer); 2 years on finishes; lifetime Pro Comp Promise on suspension
This is Pro Comp's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 28, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Alloy wheel structure (on-road use) | Lifetime, original buyer |
| Powder-coat finishes (gloss, flat, matte black) | 2 years |
| Chrome and PVD finishes | 2 years |
| Polished finishes | Not covered |
| Steel wheels (listed under finish) | 2 years |
| Suspension, shocks and steering stabilizers (Pro Comp Promise) | Lifetime, repair or replace |
| Bushings, bump stops, ball joints, tie rod ends, heim joints | 1 year (wear items) |
| Leaf and coil springs (sagging) | 5 years |
| MX Series coilovers (leakage) | 1 year |
| Suspension finish | 90 days |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Alloy wheel structural defects for life, on-road use, original buyer
- Wheel finish defects for two years on powder coat, chrome and PVD
- Suspension parts that fail under normal use, under the Pro Comp Promise
- Optional Lift Shield powertrain coverage on qualifying lift kits installed by an authorized installer
What's not covered
- Bends, dents, scratches, chips and other impact damage
- Improper installation or application, accidents and potholes
- Finish damage from neglect or harsh cleaning chemicals
- Polished wheel finishes
- Freight, labor, loss of use and consequential damage
- Shipping damage reported more than 10 days after delivery
- Second owners (the warranty does not transfer)
How to make a Pro Comp warranty claim
- Contact the retailer you bought from
- Pro Comp issues a return authorization number, valid for 60 days
- Ship the part prepaid with your contact details, where and when you bought it, and a description of the problem
- Pro Comp inspects it; covered items are replaced and shipped back prepaid
Pro Comp contact: Phone: 800-776-0767 · Email: info@procompusa.com · Pro Comp contact page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Pro Comp, and help it along either way.
Shop Pro Comp at NVMOS
See all Pro Comp products, lead times and FAQs →
Disclaimer: The information on this page describes Pro Comp's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Pro Comp official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Pro Comp has been building truck and Jeep suspension since 1985 and added wheels in 2001. Today it sells value-priced cast off-road wheels alongside lift kits backed by its lifetime Pro Comp Promise.
Based in: Ogden, Utah · Since: 1985 · Lead time: In stock: ships in 24–48 hours
Shop all 76 Pro CompWarrantyAll brands
Warranty terms are set by Pro Comp, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Pro Comp Motorsports Series DS-7 7" Round LED Light
The Pro Comp EXP76503 is a 7-inch round LED driving light with a combo reflector pattern. Thirty-two Osram 6500K LEDs are rated at 11,800 lumens on a 9 to 36 volt input.
A pair of 7-inch rounds on a front bumper or windshield-header bracket is a serious alternative to a light bar, with a classic look and a lot of reach. The housing is waterproof cast aluminum with a polycarbonate lens, sealed to IP68, and it comes with a stainless mounting bracket, hardware and a Deutsch DT 2-pin input. It is sold each, so order two for a pair. Pro Comp covers it with a limited lifetime warranty. Need wiring? The EXP76400 dual-output relay harness runs two. See the full Pro Comp lineup.
| Spec | Detail |
|---|---|
| Part number | EXP76503 |
| Size | 7" round, sold each |
| Beam | Combo reflector |
| LEDs | 32x 3W Osram, 6500K |
| Output | 11,800 lumens |
| Input | Deutsch DT 2-pin, 9-36V DC |
| Rating | IP68 |
Questions? Call or text us at (920) 249-7744.
Specifications
Pro Comp Motorsports Series DS-7 7" Round LED Light, Combo Beam (Each) FAQs
Is this a pair?
No, it is sold each. Order two for a pair.
Does it include wiring?
It has a Deutsch DT 2-pin input. The EXP76400 relay harness is the matching Pro Comp harness for a pair.
Is there a smaller version?
Yes, the 5-inch DS-5 (EXP76502) is rated at 7,700 lumens.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com


















