Pro Comp S4 Gen 3 2x2 Square LED Pods, Spot Beam (Pair)
Warranty Information
Vendor warranty summary
Pro Comp Warranty
At a glance: Lifetime structural warranty on alloy wheels (on-road use, original buyer); 2 years on finishes; lifetime Pro Comp Promise on suspension
This is Pro Comp's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 28, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Alloy wheel structure (on-road use) | Lifetime, original buyer |
| Powder-coat finishes (gloss, flat, matte black) | 2 years |
| Chrome and PVD finishes | 2 years |
| Polished finishes | Not covered |
| Steel wheels (listed under finish) | 2 years |
| Suspension, shocks and steering stabilizers (Pro Comp Promise) | Lifetime, repair or replace |
| Bushings, bump stops, ball joints, tie rod ends, heim joints | 1 year (wear items) |
| Leaf and coil springs (sagging) | 5 years |
| MX Series coilovers (leakage) | 1 year |
| Suspension finish | 90 days |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Alloy wheel structural defects for life, on-road use, original buyer
- Wheel finish defects for two years on powder coat, chrome and PVD
- Suspension parts that fail under normal use, under the Pro Comp Promise
- Optional Lift Shield powertrain coverage on qualifying lift kits installed by an authorized installer
What's not covered
- Bends, dents, scratches, chips and other impact damage
- Improper installation or application, accidents and potholes
- Finish damage from neglect or harsh cleaning chemicals
- Polished wheel finishes
- Freight, labor, loss of use and consequential damage
- Shipping damage reported more than 10 days after delivery
- Second owners (the warranty does not transfer)
How to make a Pro Comp warranty claim
- Contact the retailer you bought from
- Pro Comp issues a return authorization number, valid for 60 days
- Ship the part prepaid with your contact details, where and when you bought it, and a description of the problem
- Pro Comp inspects it; covered items are replaced and shipped back prepaid
Pro Comp contact: Phone: 800-776-0767 · Email: info@procompusa.com · Pro Comp contact page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Pro Comp, and help it along either way.
Shop Pro Comp at NVMOS
See all Pro Comp products, lead times and FAQs →
Disclaimer: The information on this page describes Pro Comp's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Pro Comp official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Pro Comp has been building truck and Jeep suspension since 1985 and added wheels in 2001. Today it sells value-priced cast off-road wheels alongside lift kits backed by its lifetime Pro Comp Promise.
Based in: Ogden, Utah · Since: 1985 · Lead time: In stock: ships in 24–48 hours
Shop all 76 Pro CompWarrantyAll brands
Warranty terms are set by Pro Comp, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Pro Comp S4 Gen 3 2x2 Square LED Pods, Spot Beam (Pair)
The Pro Comp EXP76414P is a pair of compact Gen 3 square pods with a spot beam. Each pod uses four Osram 6000K LEDs, runs on 12 or 24 volts and draws about 1.37 amps at 12V. Pro Comp lists peak raw output at 1,680 lumens.
A spot pattern pushes light down the trail instead of out to the sides, so these work well as A-pillar lights aimed past your headlights, or mounted high on a bumper to add reach. The pair comes with four color inserts (blue, red, yellow and black) to change the look or cut glare, plus U-brackets, hardware and a plug-and-play harness with Deutsch DT connectors. Housings are aluminum with a shockproof powder coat and polycarbonate lenses, sealed to IP67. Want the flood version? See the EXP76413P. Browse the full Pro Comp lineup and the Pro Comp warranty summary.
| Spec | Detail |
|---|---|
| Part number | EXP76414P |
| Quantity | Pair |
| Beam | Spot |
| LEDs | 4x Osram 6000K per pod |
| Peak raw output | 1,680 lm (per Pro Comp) |
| Current | 1.37A @ 12V, 0.68A @ 24V (each) |
| Input | Deutsch DT 2-pin, 12-24V DC |
| Pod size | 3.25" W x 3.75" H x 3.1" D |
| Rating | IP67 |
- Two Gen 3 square pods
- Four color inserts: blue, red, yellow, black
- Two universal U-brackets and hardware
- Plug-and-play wiring harness
Questions? Call or text us at (920) 249-7744.
Specifications
Pro Comp S4 Gen 3 2x2 Square LED Pods, Spot Beam (Pair) FAQs
Flood or spot?
This is the spot version, for reach down the trail. The EXP76413P is the flood version.
What are the color inserts for?
Snap-in blue, red, yellow and black covers to change the color or cut glare.
Is it a pair?
Yes, two pods.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com


















