Method 710-HD Wheel - Gloss Black
Warranty Information
Vendor warranty summary
Method Race Wheels Warranty
At a glance: Structural warranty for the original owner's ownership; 5 years on painted finish
This is Method Race Wheels's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure | As long as the original retail purchaser owns the wheels |
| Painted finish | 5 years from original purchase |
| Wheels used in racing | Not covered (structure or finish) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Structural failure under normal, intended use while the original buyer owns the wheel
- Defects in materials and workmanship
- Painted finish for five years from purchase
- Defective wheels are repaired or replaced at no charge
What's not covered
- Racing use
- Abuse, misuse, neglect, or accidents
- Wheels that were altered, repaired, or modified
- Seconds or blemished wheels sold to dealers
- Wheels run with spacers or adapters
- Wrong tire sizes, tires over 37 inches in diameter, or overloading the vehicle
- Corrosion or cosmetic damage from chemicals, cleaners, weather, or neglect
- Cosmetic flaws noticed after the wheels are mounted; shipping/handling damage
How to make a Method Race Wheels warranty claim
- Start the claim with the dealer or distributor you bought from
- Or return the wheel freight-prepaid to Method at 10000 Pioneer Blvd, Santa Fe Springs, CA 90670 after contacting them
- Method inspects and repairs or replaces defective wheels
Method Race Wheels contact: Phone: 1.866.779.8604 · Email: info@methodracewheels.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Method Race Wheels, and help it along either way.
Shop Method Race Wheels at NVMOS
Method 202 | Forged Beadlock | Machined - Raw
Method 502 | VT-Spec | Matte Black
Method 502 | VT-Spec | Method Bronze®
See all Method Race Wheels products, lead times and FAQs →
Disclaimer: The information on this page describes Method Race Wheels's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Method Race Wheels official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Method Race Wheels is a Santa Fe Springs, California company that designs off-road wheels from what it learns racing. NVMOS carries Method's non-beadlock, Bead Grip and forged beadlock wheels, van and dually wheels, and the rings, caps and lug nuts that go with them, for trucks, Jeeps, SUVs and Sprinters.
Based in: Santa Fe Springs, California · Lead time: In-stock ships in 24–48 hrs
Shop all 297 Method Race WheelsWarrantyAll brands
Warranty terms are set by Method Race Wheels, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The 710-HD is Method's heavy-duty wheel, built around its patented Bead Grip Technology and motorsports engineering. The pitch is simple: more strength for heavier loads, harder impacts and rougher terrain. This one is the gloss black version.
It is a new-release wheel, and the vendor lists it in a spread of sizes and bolt patterns, so it covers a lot of trucks and SUVs on paper. Offset and backspacing change by size, so read the variant you pick rather than assuming.
Fitment
The vendor does not name specific vehicles. Available sizes are 17x8.5 (6x5.5, 6x135 and 5x5), 18x9 (6x5.5, 6x135, 8x6.5, 8x170 and 8x180) and 20x9 (8x6.5, 8x170 and 8x180). Offsets listed are 0, 12 and 25, with backspacing from 4.8 to 5.8 inches. Confirm bolt pattern, offset and brake clearance for your vehicle before ordering.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Method 710-HD Wheel FAQs
Which vehicles does it fit?
The vendor does not list specific vehicles. Fitment is set by diameter, width, bolt pattern and offset, so match the bolt pattern to your vehicle. Call us and we will check it with you.
What sizes does it come in?
17x8.5, 18x9 and 20x9, each in several bolt patterns including 5x5, 6x5.5, 6x135, 8x6.5, 8x170 and 8x180.
What is Bead Grip Technology?
It is Method's patented wheel technology. The vendor pairs it with motorsports engineering and heavy-duty strength for this wheel.
Do offsets vary?
Yes. Listed offsets are 0, 12 and 25 depending on size and bolt pattern.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
