Fishbone Offroad Aluminum Rear Inner Fenders for 2020 & Up Gladiator JT FB33211R
Warranty Information
Vendor warranty summary
Fishbone Offroad Warranty
At a glance: 90 days on powder coat finish; off-road damage and hardware not covered
This is Fishbone Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Powder coat finishes (materials and workmanship) | 90 days from original purchase |
| Hardware and accessories (latches, lights, bolts, etc.) | Not covered |
| Tire carrier spindles on bumpers | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in material and workmanship on powder coat finishes for 90 days
- Defective parts are repaired or replaced (Fishbone's choice) after inspection
- Only new products installed on the original vehicle
What's not covered
- Damage from off-road use or accidents
- Shipping damage, misuse, mishandling, road hazards, or modifications
- Installation, removal, labor, shipping, duties or taxes
- Rust from leaving road salt or de-icing chemicals on the product (counts as neglect)
- Using any chemical on the product without checking with Fishbone first
- Incidental or consequential damage
How to make a Fishbone Offroad warranty claim
- Email Fishbone customer service with your original purchase invoice
- Get an RGA (return goods authorization) number
- Ship the part back with the bill of sale and RGA number at your own cost
- Fishbone inspects it before deciding on repair or replacement
Fishbone Offroad contact: Phone: 330-423-6446 · Email: customerservice@fishboneoffroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Fishbone Offroad, and help it along either way.
Shop Fishbone Offroad at NVMOS
Fishbone Offroad Rock Slider with Tube Step for 2004-2006 Jeep Wrangler Unlimited FB23085
Fishbone Offroad Triangular Gusset FB26056
Fishbone Offroad Mobile Fire Pit FB21299
See all Fishbone Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes Fishbone Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Fishbone Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Fishbone Offroad is a North Lima, Ohio team of Jeep owners building affordable steel bumpers, armor and accessories. NVMOS carries their bumpers, rock sliders, tube doors, fender flares and racks for Jeep CJ through JL, Gladiator, Tacoma, Tundra, F-150, Bronco, Ram and Silverado.
Based in: North Lima, Ohio · Lead time: In-stock ships in 24–48 hrs
Shop all 351 Fishbone OffroadWarrantyAll brands
Warranty terms are set by Fishbone Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Fishbone Offroad Aluminum Rear Inner Fenders FB33211R — Jeep Gladiator JT (2020+)
Tube fenders on a Gladiator leave the rear wheel wells open. This pair of black powder-coated aluminum inner fenders closes them in, finishes the look and adds protection from rocks and debris.
This is the rear set only, two panels, and they are inner panels only. The vents and accent plates are removable, so you can paint them to match your truck.
| Spec | Detail |
|---|---|
| Part number | FB33211R |
| Fitment | 2020 to current Jeep Gladiator JT |
| Material | Aluminum |
| Finish | Black powder coat |
| Position | Rear only |
| Quantity | Set of 2 |
| Detail | Removable vents and accent plates for custom paint; laser-cut Fishbone logo |
| Note | Inner panels only |
Does this include the front inner fenders?
No. This is the rear set only, two panels.
Will these fit my truck?
They fit the 2020 to current Jeep Gladiator JT.
Can I paint the accents?
Yes. The vents and accent plates are removable so you can paint them.
Do I need tube fenders?
They are designed to finish a tube fender install. These are only the inner panels; outer fenders are separate.
Videos
Install guides & documents
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
More for your Jeep Gladiator
Picked from the 1728 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com



























