Filter Wrap for KF-1090
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
S&B Filters Warranty
At a glance: Million Mile Limited Warranty; lifetime on S&B Suspension
This is S&B Filters's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Most S&B products (default, incl. lighting) | Million Mile Limited Warranty |
| S&B Suspension (e.g. radius arm drops) | Lifetime (original purchaser) |
| Intake elbows | 5 years |
| Body mounts | Lifetime (original purchaser) |
| Diesel fuel tanks | Lifetime |
| Particle separator electrical / flexible ducting | 3 years / 1 year |
| Competitor (CR-series) air filters | 1 year, manufacturing defects only |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Products that fail or prove defective under normal driving
- S&B replaces covered products
- Applies only to products bought from authorized S&B dealers
What's not covered
- Racing or competition use
- Custom modifications or unauthorized changes
- Industrial or marine use, or illegal on-highway applications
- Normal wear, chemical damage and improper installation
- Products from unauthorized dealers or with removed/altered serial numbers
- Consequential, indirect or special damages
How to make a S&B Filters warranty claim
- Call or email S&B customer service
- Send proof of purchase plus photos of the problem
- Get an RMA number before shipping anything back
- Pay return shipping; S&B decides coverage and arranges replacement
S&B Filters contact: Phone: (909) 947-0015 · Email: customerservice@sbfilters.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to S&B Filters, and help it along either way.
Shop S&B Filters at NVMOS
Cold Air Intake For 2021-2026 Ford F-150 3.5L PowerBoost
Cold Air Intake for 2019-2026 Chevrolet Silverado 1500 / GMC Sierra 1500 2.7L
S&B Replacement Clear Lid (Hardware Not Included) - AM0388-00
See all S&B Filters products, lead times and FAQs →
Disclaimer: The information on this page describes S&B Filters's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: S&B Filters official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
S&B Filters is a family-owned manufacturer in Fontana, California, that started with cold air intakes. NVMOS carries S&B intakes and filters, intercooler pipes, Ford Super Duty suspension, body mounts and van water tanks for gas and diesel trucks, Toyota trucks and SUVs, and Sprinter, Transit and ProMaster vans.
Based in: Fontana, California · Lead time: In-stock items ship in 24–48 hours
Shop all 566 S&B FiltersWarrantyAll brands
Warranty terms are set by S&B Filters, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
S&B Filter Wrap for KF-1090 — Toyota Tundra & Sequoia 3.4L
This is S&B’s filter wrap for the KF-1090 filter used in the S&B 75-5163 cold air intake on the 2022–2026 Toyota Tundra and 2023–2026 Sequoia 3.4L. It slips over the filter as an extra layer against dust, dirt and water on the trail.
The 75-5163 kit runs two filters, so S&B lists the wraps as “2x filter wraps (optional)” for that intake — most trucks will want two.
| Spec | Detail |
|---|---|
| Part number | WF-1070 |
| Fits filter | S&B KF-1090 / KF-1090D (5.125" flange ID, 5.5" element, 11.70" base OD, 9.75" top OD) |
| Used on | S&B 75-5163 cold air intake |
| Vehicle fitment | 2022–2026 Toyota Tundra 3.4L & 3.4L Hybrid; 2023–2026 Toyota Sequoia 3.4L Hybrid |
| Quantity needed | The 75-5163 intake uses 2 filters — 2 wraps to cover both |
How many do I need?
The S&B 75-5163 intake uses two KF-1090 filters, so you’ll need two wraps to cover both.
Does it fit other filters?
It is made for the S&B KF-1090 filter. Call us to confirm fit on anything else.
Which trucks is this for?
2022–2026 Tundra 3.4L and 3.4L Hybrid, and 2023–2026 Sequoia 3.4L Hybrid running the S&B intake.
Product details
| Part number | WF-1070 |
|---|---|
| Replacement filter | KF-1090 |
Vehicle fitment
| Year | Make | Model | Engine |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | 3.4L, Gas |
| 2022-2026 | Toyota | Tundra | 3.4L Hybrid, Gas |
| 2023-2026 | Toyota | Sequoia | 3.4L Hybrid, Gas |
Frequently bought together
Complete your Toyota Sequoia build
More parts that fit your Toyota Sequoia and pair well with this one — matched and ready to install.
$59.00
$36.00
$67.99
$39.99
$29.99
More for your Toyota Sequoia
Picked from the 398 parts we carry for the Toyota Sequoia. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
