DV8 Offroad Tube Front Bumper - 2023-2026 GMC Canyon
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 494 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Offroad's tube front bumper for the 2023-2026 Canyon is a high-profile, high-clearance design that splits the difference between desert running and technical rock crawling. An integrated full skid plate protects the front end, gray accent skid plates give it a prerunner look, and the rest is finished in micro-texture black powder coat.
Each side wing carries a single 3-inch pod mount, and the center section takes a 20-inch dual row bar or up to six 3-inch pods. The included push bar adds room for a 20-inch bar, four 7-inch rounds or up to eight 3-inch pods. A solid steel recovery point is built in, so you keep a front pull point that many tube bumpers drop, and welded zip-tie tabs keep wiring tidy.
Fitment
Fits 2023-2026 GMC Canyon. It does not obstruct the front camera or interfere with factory sensors, but the factory skid plate and fog lights are not retained. If your truck already wears DV8's Spec Series bumper (FBGC3-01), you cannot switch to this one: the two use different cut lines that do not overlap.
What's included
The bumper with full skid plate, gray accent skid plates, push bar and built-in recovery point.
Install notes
Bolt-on, but it requires cutting the factory bumper, fascia, inner grille and wheel well liner. Expect about 6.5 hours.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your GMC Canyon build
More parts that fit your GMC Canyon and pair well with this one — matched and ready to install.
$1,249.99
$1,099.99
$129.99
$799.99
$799.99
More for your GMC Canyon
Picked from the 127 parts we carry for the GMC Canyon, matched to 2023–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
DV8 Offroad Tube Front Bumper FAQs
I already have the DV8 Spec Series bumper. Can I switch to this one?
No. The Spec Series (FBGC3-01) and this Tube Series bumper use unique cut lines that do not overlap, so they are not direct replacements for each other.
How much cutting is involved?
Cutting is required on the factory bumper, fascia, inner grille and wheel well liner. Installation takes about 6.5 hours.
Will it block my front camera or sensors?
No. It does not obstruct the front camera or interfere with factory sensors.
Does it keep the factory fog lights?
No. The factory skid plate and fog lights are not retained.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
