40 AMP DTP 4-Pin Halo Light Harness
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 493 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 40 AMP DTP 4-Pin Halo Light Harness
This harness powers a single DV8 halo-equipped light and is plug-and-play with the DV8 20-Inch Halo Elite Dual Row Light Bar with Accent Light. Two round switches give independent control of the main light and the accent halo.
It uses 14-gauge wire with a 40 amp fuse and 40 amp relay for circuit protection. The halo switch cycles through OFF, WHITE and AMBER, and both switches come in round mounts for a tidy dash install.
| Spec | Detail |
|---|---|
| Part number | UNWH-05 |
| Wire | 14 gauge |
| Fuse / relay | 40 A fuse, 40 A relay |
| Light lead | 10 ft with 4-pin male Deutsch connector |
| Switch lead | 10 ft |
| Power / ground | 1 ft leads with in-line fuse and ring terminals |
| Switches | Two round switches with mounts; halo OFF / WHITE / AMBER |
| Plug-and-play with | DV8 20 in Halo Elite Dual Row Light Bar with Accent Light |
| Install | Drilling required for switches; professional install recommended; estimated 60 minutes |
| Warranty | One-year limited warranty from DV8 against defects in workmanship and material |
Which light is it made for?
It is plug-and-play with the DV8 20-Inch Halo Elite Dual Row Light Bar with Accent Light, and designed for DV8 lights with accent halo features.
Can it run two lights?
No. It is designed to power one light.
Is drilling required?
Yes, to mount the switches. DV8 recommends professional installation.
How is this different from the DT halo harness?
The DT version is for the DV8 7-inch round and 20-inch single row halo lights. This DTP version is for the 20-inch dual row halo bar.
Install guides & documents
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
