Hi-Lite Overland Toyota 4Runner Front Bumper 5th Gen (2010-2024) [Bull Bar]
Warranty Information
Vendor warranty summary
Backwoods Adventure Mods Warranty
At a glance: Lifetime structural warranty to the original purchaser; 60 days on powder coat
This is Backwoods Adventure Mods's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 16, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Product structure (bumpers, racks, armor) | Lifetime, original purchaser |
| Powder coat | 60 days |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and craftsmanship in the product structure under normal, proper use
- Powder coat defects within 60 days
- Backwoods repairs or replaces at its discretion after inspecting the product, at no added cost if approved
What's not covered
- Improper installation or alterations
- Abuse, neglect or accidents
- Corrosion and normal wear and tear
- Freight, labor, installation costs, incidental damages or vehicle downtime
How to make a Backwoods Adventure Mods warranty claim
- Send a written description of the damage and how it happened
- Include a copy of the original purchase invoice
- Make the product available for Backwoods to inspect
- If approved, Backwoods repairs or replaces within a reasonable time
Backwoods Adventure Mods contact: Phone: 479.365.6700 · Email: info@backwoodsadventuremods.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Backwoods Adventure Mods, and help it along either way.
Shop Backwoods Adventure Mods at NVMOS
Backwoods Hi-Lite Overland Toyota Tacoma Front Bumper 4th Gen (2024-2026) [Bull Bar]
Backwoods DRIFTR Toyota Tacoma Roof Rack (2024-2026)
Backwoods Toyota 5th Gen 4Runner Rock Sliders (2010-2024)
See all Backwoods Adventure Mods products, lead times and FAQs →
Disclaimer: The information on this page describes Backwoods Adventure Mods's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Backwoods Adventure Mods official warranty information. Last updated on nvmos.com: October 16, 2026. See our return policy for NVMOS's own terms.
About the brand
Backwoods Adventure Mods designs and builds bumpers, rock sliders, skid plates and racks in Springdale, Arkansas, for the Toyota Tacoma, 4Runner, Tundra and Land Cruiser 250, the Lexus GX550 and the Jeep Gladiator. Its Hi-Lite Overland hybrid bumpers put an aluminum shell over a steel winch plate and use steel recovery points, so you shed weight without trusting a recovery to aluminum. DRIFTR roof racks and overland bed racks cover...
Based in: Springdale, Arkansas · Brand since: 2017 · Built: In-house, in batch production runs · Lead time: In-stock items typically ship in 1–2 business days; out-of-stock items join the next batch build
Shop all 72 Backwoods Adventure ModsWarrantyAll brands
Warranty terms are set by Backwoods Adventure Mods, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Hi-Lite Overland front bumper for the 2010–2024 5th Gen 4Runner is a true hybrid: steel where the loads are, aluminum where weight would otherwise pile up. This version carries a full triple-hoop bull bar, and the whole bumper still comes in at 86 lbs.
Why it works
Plenty of bumpers called "hybrid" are really one material. Backwoods splits the job. The winch plate and recovery points are steel, because that is what you pull on. The outer shell is aluminum, because that is the part that mostly needs to be shaped and tough rather than heavy. Keeping front-end weight down matters on a 4Runner — it is weight hanging off the front of the truck all day, on and off the trail.
Weight breakdown
- Aluminum outer shell: 31 lbs
- Steel winch plate and recovery points: 55 lbs
- Full combined bumper: 86 lbs
Fitment
Toyota 4Runner, 5th Gen, 2010–2024. Designed and manufactured in the USA.
Shipping
This is a freight item, so plan for a larger delivery.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
More for your Toyota 4Runner
Picked from the 1251 parts we carry for the Toyota 4Runner, matched to 2010–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Hi-Lite Overland Toyota 4Runner Front Bumper 5th Gen (2010-2024) [Bull Bar] FAQs
How much does this bumper weigh?
86 lbs combined: a 31 lb aluminum outer shell and 55 lbs of steel winch plate and recovery points.
What does "hybrid" mean here?
The bumper uses both steel and aluminum. The winch plate and recovery points are steel; the outer shell is aluminum.
Which 4Runners does it fit?
The 5th Gen Toyota 4Runner, 2010 through 2024.
Is there a version without the bull bar?
Yes, Backwoods makes a No Bull Bar version and a PreRunner Bull Bar version of this bumper. Questions? Call the real humans at NVMOS, (920) 249-7744.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Buy now, pay later with PayPal Credit — available at checkout.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com












































