Clayton Off Road Jam Nut Wrenches (Pair) - Large
Warranty Information
Vendor warranty summary
Clayton Off Road Warranty
At a glance: Limited lifetime on control arms and track bars; 1 year on joints, bushings, springs, skids and brackets
This is Clayton Off Road's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Control arms and track bars (bending or breaking) | Limited lifetime (original buyer) |
| Johnny Joint bushings, GIRRO joints, washers, snap rings, rubber bushings | 1 year (workmanship defects) |
| Brake lines, coil springs, leaf springs | 1 year (workmanship defects) |
| Skid plates, mounting brackets, hardware | 1 year (workmanship defects) |
| Non-Clayton products sold by Clayton | That maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Control arms and track bars that bend or break from a manufacturing defect
- Workmanship defects on wear and other components for 1 year from purchase
What's not covered
- Minor finish flaws on powder-coated or plated parts from shipping
- Labor, towing, shipping, taxes, loss of use or revenue
- Abuse, accidents, alteration, modification, tampering, neglect or misuse
- Improper installation
- Sanctioned racing use
- Damage from loose or poorly maintained jam nuts (treated as neglect)
- Any item modified in any way
How to make a Clayton Off Road warranty claim
- Contact Clayton Off Road to get an RGA (return goods authorization) number
- Ship the part back at your cost, insured; C.O.D. packages are refused
- Pay shipping on the replacement part as well
- For non-Clayton parts, contact that manufacturer directly
Clayton Off Road contact: Phone: (203) 691-8593 · Email: customerservice@claytonoffroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Clayton Off Road, and help it along either way.
Shop Clayton Off Road at NVMOS
![Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]](https://cdn.shopify.com/s/files/1/0861/5113/5535/files/4100900.jpg?v=1776202964&width=400)
Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]
Jeep OVERLAND+ Short Rear Upper Control Arms (1993-2006, TJ/LJ/ZJ)
Jeep Wrangler Adjustable Front Sway Bar End Links (2018+, JL/JT)
See all Clayton Off Road products, lead times and FAQs →
Disclaimer: The information on this page describes Clayton Off Road's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Clayton Off Road official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Clayton Off Road builds Jeep suspension in the USA and ships it from Hamden, Connecticut. NVMOS carries Clayton lift kits, control arms, adjustable track bars, Johnny Joints, 4-link trusses and skid plates for Wrangler TJ/LJ, JK, JL and Gladiator JT. It's for Jeeps that commute all week and crawl on weekends.
Based in: Hamden, Connecticut · Made in: USA · Founded: 2001 · Lead time: Clayton in-stock: 1–3 business days; NVMOS stock: 24–48 hours
Shop all 583 Clayton Off RoadWarrantyAll brands
Warranty terms are set by Clayton Off Road, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
A standard 1-7/8 inch wrench for a large jam nut is expensive and often too loose to trust when you need to torque suspension hardware. Clayton Off Road offers this pair as a closer-fitting, cheaper alternative, so the nut is less likely to round off.
You get two tools. The crow's foot wrench contacts all six sides of the 1-1/4 inch jam nut, and the standard wrench handles places where there is not room for the crow's foot. Inside width is 1.843 inches, slightly under a standard 1.875 inch wrench.
Fitment
Sized for the 1-1/4 inch jam nuts used on Clayton Off Road parts. Not vehicle specific.
What's included
Two wrenches: one crow's foot and one standard.
Usage notes
These wrenches are made for the jam nuts on Clayton Off Road parts and may not work on other brands. The ends suit normal install and adjustment work. For sustained high torque or frequent use, Clayton recommends a properly sized box wrench instead. Keep torque at or below 200 ft/lbs, and use them with a 1/2 inch driver or torque wrench.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
Clayton Off Road Jam Nut Wrenches (Pair) FAQs
What drive size do they take?
They are designed for a 1/2 inch driver or torque wrench.
Will they work on non-Clayton parts?
They are designed specifically for the jam nuts on Clayton Off Road products and may not work on other applications.
What is the torque limit?
Do not exceed 200 ft/lbs.
What is in the pair?
A crow's foot wrench that grips all six sides of the 1-1/4 inch jam nut, and a standard wrench for harder-to-reach spots.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
