CE-9112NC-13 - NARROW 2" FORGED JOHNNY JOINT® W/ 5" OF 1" RH THREAD & 9/16" X 1.6" Width
Warranty Information
Vendor warranty summary
Clayton Off Road Warranty
At a glance: Limited lifetime on control arms and track bars; 1 year on joints, bushings, springs, skids and brackets
This is Clayton Off Road's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Control arms and track bars (bending or breaking) | Limited lifetime (original buyer) |
| Johnny Joint bushings, GIRRO joints, washers, snap rings, rubber bushings | 1 year (workmanship defects) |
| Brake lines, coil springs, leaf springs | 1 year (workmanship defects) |
| Skid plates, mounting brackets, hardware | 1 year (workmanship defects) |
| Non-Clayton products sold by Clayton | That maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Control arms and track bars that bend or break from a manufacturing defect
- Workmanship defects on wear and other components for 1 year from purchase
What's not covered
- Minor finish flaws on powder-coated or plated parts from shipping
- Labor, towing, shipping, taxes, loss of use or revenue
- Abuse, accidents, alteration, modification, tampering, neglect or misuse
- Improper installation
- Sanctioned racing use
- Damage from loose or poorly maintained jam nuts (treated as neglect)
- Any item modified in any way
How to make a Clayton Off Road warranty claim
- Contact Clayton Off Road to get an RGA (return goods authorization) number
- Ship the part back at your cost, insured; C.O.D. packages are refused
- Pay shipping on the replacement part as well
- For non-Clayton parts, contact that manufacturer directly
Clayton Off Road contact: Phone: (203) 691-8593 · Email: customerservice@claytonoffroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Clayton Off Road, and help it along either way.
Shop Clayton Off Road at NVMOS
![Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]](https://cdn.shopify.com/s/files/1/0861/5113/5535/files/4100900.jpg?v=1776202964&width=400)
Jeep Wrangler Engine Skid Plate (1996-2006, TJ/LJ) [6 Cyl ONLY]
Jeep OVERLAND+ Short Rear Upper Control Arms (1993-2006, TJ/LJ/ZJ)
Jeep Wrangler Adjustable Front Sway Bar End Links (2018+, JL/JT)
See all Clayton Off Road products, lead times and FAQs →
Disclaimer: The information on this page describes Clayton Off Road's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Clayton Off Road official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Clayton Off Road builds Jeep suspension in the USA and ships it from Hamden, Connecticut. NVMOS carries Clayton lift kits, control arms, adjustable track bars, Johnny Joints, 4-link trusses and skid plates for Wrangler TJ/LJ, JK, JL and Gladiator JT. It's for Jeeps that commute all week and crawl on weekends.
Based in: Hamden, Connecticut · Made in: USA · Founded: 2001 · Lead time: Clayton in-stock: 1–3 business days; NVMOS stock: 24–48 hours
Shop all 511 Clayton Off RoadWarrantyAll brands
Warranty terms are set by Clayton Off Road, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
RockJock Narrow 2" Forged Johnny Joint — 1"-14 RH Thread, 9/16" x 1.600" Ball (CE-9112NC-13)
The Johnny Joint is Currie’s urethane-bushed spherical joint, a staple of off-road suspension since 1996. It flexes like a heim joint but uses a urethane bushing to quiet road noise and absorb impacts, and it is greasable and rebuildable.
This narrow 2" forged version has a long 5" of 1"-14 right-hand thread and a 9/16" x 1.600" ball — originally designed for Jeep JK track bars, and used as a replacement or in custom links and control arms.
| Spec | Detail |
|---|---|
| Part number | CE-9112NC-13 |
| Brand | RockJock 4x4 (Currie Enterprises), sold by Clayton Off Road |
| Barrel | 2" OD x 1.20" wide (narrow) |
| Thread | 1"-14 RH, 5" of thread |
| Length | 6.430" from joint centerline to end of threads |
| Ball | 9/16" (0.562") thru-hole x 1.600" wide (fits 14mm bolt) |
| Articulation | 28° |
| Bushing | One-piece urethane |
| Grease fitting | 1/4"-28 zerk |
| Quantity | 1 fully assembled joint |
Is this left- or right-hand thread?
Right-hand: 1"-14 RH.
What bolt does it take?
A 9/16" bolt through a 1.600" wide ball. It also fits a 14mm bolt.
Can I grease it?
Yes. It has an external 1/4"-28 zerk. Use a hand-pump grease gun only.
What is it used for?
It was originally designed for Jeep JK front and rear track bars, and is used as a replacement or in custom links and control arms.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
