2022-2026 Ford Bronco Raptor Spec Series Winch Front Bumper
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 498 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Spec Series Winch Front Bumper for 2022-2026 Ford Bronco Raptor
The Spec Series bumper for the Bronco Raptor is DV8's slimmest design, built to follow the Raptor's factory lines while freeing up clearance and approach angle. It takes a range of winch sizes and has two 1-inch D-ring mounts for 3/4-inch shackles.
An HD skid plate replaces the factory skid, and a bull bar guards the winch and grille. It retains the factory sensors and bolts on with no drilling or cutting, though it does block the front camera and does not keep the factory fog lights.
| Spec | Detail |
|---|---|
| Part number | FBFR-01 |
| Fitment | 2022-2026 Ford Bronco Raptor only |
| Not compatible | Factory fog lights, factory skid plate, non-Raptor Broncos |
| Sensors and camera | Factory sensors retained; front camera is obstructed |
| Adaptive cruise control | Requires ABBR-01 relocation mount, sold separately |
| Included | Bumper, HD skid plate, bull bar, standard accent panel, optional accent panel with red R, mounting hardware |
| Light bar mounts | 20 in. behind mesh (Baja S8 20, Rigid SR 20, DV8 Elite 20); bull bar: Baja S8 10, Rigid SR 10, DV8 Elite 13 |
| Pod mounts | Four 3 in. pods on the wings |
| Material | 3mm, 3.5mm and 5mm steel plate; 2.5mm steel tube |
| Finish | Micro-texture black powder coat |
| Installation | Fully bolt-on, no drilling or cutting, approx. 4 hours; a helper is required |
Will it fit a standard Bronco?
No. This bumper is only compatible with the 2022-2026 Bronco Raptor.
Does it keep the front camera?
The bumper obstructs the front camera. Factory sensors are retained, and adaptive cruise control needs the ABBR-01 relocation mount, sold separately.
Which light bars fit the bull bar?
Baja Designs S8 10-inch, Rigid SR Series 10-inch and DV8 Elite 13-inch single row.
Is drilling required?
No. It is fully bolt-on. DV8 estimates about 4 hours and says you will need a helper.
Compatibility
| 2022-2026 Ford Bronco | Raptor |
|---|
Install guides & documents
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
$1,399.99
$229.99
$59.99
$59.99
$99.99
More for your Ford Bronco
Picked from the 1160 parts we carry for the Ford Bronco, matched to 2022–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
