2022-2026 Ford Bronco Raptor Phantom Rear Bumper
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 327 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Addictive Desert Designs Phantom Rear Bumper — 2022-2026 Ford Bronco Raptor
The Phantom rear carries the same knife's-edge, low-profile styling as ADD's Phantom front. A recessed mount on each side takes a 3-inch cube light, framed by satin black aluminum accent panels.
It keeps the OEM parking sensors on equipped trucks, plus the hitch and trailer plug, and the factory carrier still holds a spare up to 37 inches. An included license plate bracket moves the plate up along the tailgate and relocates the factory plate light with it.
| Spec | Detail |
|---|---|
| Part number | R260191090103 |
| Fitment | 2022-2026 Ford Bronco Raptor |
| Finish | Dual-stage hammer black powder coat; satin black powder coat aluminum panels |
| Light mounts | One 3-inch cube light mount each side (lights not included) |
| Recovery | 1-inch-thick clevis mounts for 3/4-inch D-rings |
| Spare tire | Up to 37 inches on the factory carrier |
| Retains | OEM parking sensors (equipped models), hitch, trailer harness plug |
| Included | License plate bracket; factory plate light relocated |
| Install | Fully bolt-on; install guide available from ADD |
| Origin | Made in the USA |
How big a spare can I run?
ADD says the factory carrier fits a spare tire up to 37 inches with this bumper.
Are the cube lights included?
No. The bumper has a 3-inch cube light mount on each side; lights are sold separately.
What happens to the license plate?
The included bracket moves it up and away from the bumper along the tailgate, and the factory plate light moves with it.
Can I still tow?
Yes. The OEM hitch and trailer harness plug are retained.
Videos
Install guides & documents
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
$1,698.98
$169.00
$1,369.00
$459.00
$565.00
More for your Ford Bronco
Picked from the 1160 parts we carry for the Ford Bronco, matched to 2022–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
