2021-2026 Ford Bronco | Tube Fender Flares
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 498 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Tube Fender Flares for 2021-2026 Ford Bronco
DV8's Bronco fender flares swap the factory flares for plate steel that kicks out from the body and finishes in tube steel at the outer edge. They are 4 inches wide at the front and taper to 3.75 inches toward the rear, which opens up room for the tires to articulate off-road.
The set covers all four corners, includes a rubber seal where the flare meets the body to keep dust and small rock from packing in, and bolts on with no cutting or drilling. Sasquatch and non-Sasquatch trucks both fit.
| Spec | Detail |
|---|---|
| Part number | FDBR-01 |
| Fitment | 2021-2026 Ford Bronco: Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak; Sasquatch and non-Sasquatch |
| Not compatible | Heritage, Everglades, Raptor |
| Included | Set of 4 fenders, rubber seal |
| Width | 4 in. at front, tapering to 3.75 in. at middle and rear (front and rear fenders) |
| Material | 2.5mm/3.5mm steel plate, 2.5mm steel tube |
| Finish | Micro-texture black |
| Installation | Bolt-on, no cutting or drilling, approx. 2 hours |
| Warranty | DV8 one-year limited warranty from date of purchase, covering defects in workmanship and material |
Which Bronco trims do these fit?
Base, Big Bend, Black Diamond, Outer Banks, Badlands and Wildtrak, with or without the Sasquatch package. They are not compatible with Heritage, Everglades or Raptor models.
How wide are they?
4 inches at the front, tapering to 3.75 inches through the middle and rear.
Do I have to cut the body?
No. They bolt on with no cutting or drilling. DV8 estimates about 2 hours.
Is it a full set?
Yes, all four fenders plus the rubber seal.
Compatibility
| 2021-2026 Ford Bronco | BaseBig BendBlack DiamondOuter BanksBadlandsWildtrack(Excluding Heritage, Everglades, Raptor Models) |
|---|
Install guides & documents
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
More for your Ford Bronco
Picked from the 1163 parts we carry for the Ford Bronco, matched to 2021–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com








































