2023-2026 Ford Super Duty | Bomber Rear Bumper
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 327 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ADD Bomber Rear Bumper — 2023-2026 Ford Super Duty
The Bomber rear bumper is built to tight tolerances so it follows the body lines of the 2023 and newer Super Duty. It is steel in a hammer black powder coat with satin black accent panels, and it bolts on.
The rear of the truck keeps working as before: backup sensors, hitch receiver, trailer harness and license plate light are all retained. A rear-facing cube light mounts behind each side panel, and 1-inch clevis mounts give you rear recovery points.
| Spec | Detail |
|---|---|
| Brand | Addictive Desert Designs (ADD) |
| Part number | R810141090103 |
| Fitment | 2023-2026 Ford Super Duty F-250, F-350, F-450 |
| Construction | Steel; satin black accent panels |
| Finish | Hammer black powder coat |
| Light mounts | (2) rear-facing 3-inch cube lights |
| Recovery | 1-inch clevis mounts for 3/4-inch D-rings (7/8-inch pins) |
| Retains | Parking sensors, hitch, trailer harness, license plate light |
| Install | Fully bolt-on |
| Origin | Made in the USA (Chandler, Arizona) |
Can I still tow?
Yes. The OEM hitch and trailer harness are retained.
Are the backup sensors kept?
Yes. The bumper has cutouts for the OEM sensors on equipped trucks.
What lights does it take?
Two 3-inch cube lights, one behind each side panel. Lights are sold separately.
Does it match the Bomber front bumper?
It is the rear bumper in ADD's Bomber line for the 2023-2026 Super Duty.
Videos
Install guides & documents
Complete your Super Duty build
More parts that fit your Super Duty and pair well with this one — matched and ready to install.
More for your Ford Super Duty
Picked from the 3024 parts we carry for the Ford Super Duty, matched to 2023–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com



























