ADD-Lander Overland Rack
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: November 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: November 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 327 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ADD-Lander Overland Bed Rack for Ford F-150 and Raptor
The ADD-Lander is Addictive Desert Designs’ overland bed rack for the Ford F-150 and F-150 Raptor. It combines tube and plate steel for a distinct look, and slotted cross members and side rails accept most accessory mounts, from Rotopax fuel or water containers to recovery gear, tools and safety equipment.
It clamps to the bed with no drilling or cutting, and cutouts in the side panels leave room for Ford’s bed cleats. ADD built it stout enough for heavier loads such as a rooftop tent.
| Spec | Detail |
|---|---|
| Part number | C118822000103 |
| Fitment | 2015-2020 Ford F-150; 2017-2020 Ford F-150 Raptor (ADD fitment table) |
| Construction | Tube and plate steel |
| Finish | Hammer black powder coat |
| Mounting | Clamp system, no drilling or cutting |
| Accessory mounting | Slotted cross members and side rails |
| Bed features | Side panel cutouts for Ford bed cleats |
| Installation | Install instructions available from ADD |
| Made in | USA |
Do I have to drill my bed?
No. The rack uses a clamp mounting system with no drilling or cutting.
Which trucks does it fit?
ADD’s fitment table lists the 2015-2020 Ford F-150 and 2017-2020 F-150 Raptor. Confirm your model year before ordering.
Can it carry a rooftop tent?
ADD describes the rack as sturdy enough for heavier items such as rooftop tents. It does not publish a load rating, so check your tent’s requirements.
Can I still use the bed cleats?
Yes. The side panels have cutouts for the Ford bed cleats.
Videos
Install guides & documents
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
