2021-2026 Ford Bronco | Factory Modular Front Bumper Bull Bar
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 498 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Offroad Factory Modular Front Bumper Bull Bar — 2021–2026 Ford Bronco
This bull bar is made for the Bronco OEM modular steel front bumper and bolts to the factory accessory mount locations using OEM hardware. It rides lower than the Ford bar and stays below the BRONCO lettering instead of crossing it.
An inset mount holds a 13-inch single-row LED light bar inside the bar, and the steel guards the grille from branches and small debris.
| Spec | Detail |
|---|---|
| Part number | LBBR-04 |
| Fitment | 2021–2026 Ford Bronco with the factory HD modular steel bumper, including Raptor |
| Not compatible | Plastic bumper; Capable steel bumper |
| Light mount | 13 in. single-row LED light bar (inset) |
| Material | 3.5mm steel |
| Finish | Micro-texture black powder coat |
| Weight | Approx. 10 lb |
| Install | Bolt-on with factory hardware, no drilling; minor wiring for lights; approx. 60 minutes |
| Warranty | 1-year DV8 Offroad limited warranty (defects in workmanship and material) |
Which bumper does it fit?
Only the factory heavy-duty modular steel front bumper, Raptor included. It does not fit the plastic or Capable steel bumper.
What light does it take?
A 13-inch single-row LED light bar mounted inside the bar.
Is drilling required?
No. It bolts to the factory accessory mount locations with OEM hardware. Lights need minor wiring.
How is this different from the DV8 Factory Bumper Bull Bar?
This one holds an inset 13-inch light bar. The Factory Bumper Bull Bar (LBBR-06) uses two adjustable tabs for a light bar up to 20 inches or pods.
Compatibility
| 2021-2026 Ford Bronco | Heavy Duty Modular Front Bumper Only. Also Fits Raptors. |
|---|
Install guides & documents
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
More for your Ford Bronco
Picked from the 1162 parts we carry for the Ford Bronco, matched to 2021–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com

































