2025-2026 4Runner Roof Rack Light Cutout Fairing
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 498 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Roof Rack Light Cutout Fairing for 2025-2026 4Runner
This front fairing is made for one rack only: DV8's Spec Series Roof Rack for the 6th Gen 4Runner (RRTF3-02). It closes up the front of the rack and gives you a place to mount lights low and tight to the roof line.
Ten integrated slots handle a 40-inch straight light bar, a pair of 20-inch single row bars, or up to ten 3-inch pods. Keeping the lights tucked behind the fairing cuts down on drag and wind noise compared with a bar hanging out front.
| Spec | Detail |
|---|---|
| Part number | RRTF3-02L |
| Compatible with | DV8 Spec Series Roof Rack for the 2025-2026 4Runner (RRTF3-02) only |
| Light options | (1) 40 in straight bar (42 in mount to mount), (2) 20 in single row bars, or up to (10) 3 in pods |
| Included | Brackets for two 20 in single row bars |
| Material | 3mm and 5mm steel plate |
| Finish | Micro-texture black powder coat |
| Install | Bolt-on; about 1.5 hours on an installed rack, or about 30 minutes added to a full rack install |
| Warranty | One-year limited warranty from DV8 against defects in workmanship and material |
Will it fit a different roof rack?
No. It fits only the DV8 Spec Series Roof Rack for the 6th Gen 4Runner, part RRTF3-02.
What size 40-inch bar fits?
A 40-inch straight light bar measuring 42 inches mount to mount.
Is mounting hardware included for my lights?
Brackets for two 20-inch single row bars are included. Hardware for other lights varies by light manufacturer.
Can I add it after the rack is on?
Yes. DV8 estimates about 1.5 hours on an installed rack, or about 30 extra minutes if you add it during the rack install.
Install guides & documents
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
More for your Toyota 4Runner
Picked from the 1846 parts we carry for the Toyota 4Runner, matched to 2025–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com




























