In-stock parts ship in 24–48 hours · Questions? Real humans: (920) 249-7744

Shop by Vehicle Pick your rig and see everything that fits
1
2
3
Browse popular rigs & all vehicles Hide vehicles
SKU: UNWH-01

60 AMP Wire Harness w/ Switch & DTP Connector

$44.99

180-Day ReturnsOn uninstalled, unused parts Real humans who wheel(920) 249-7744 Financing availableAffirmPayPal CreditFor qualified buyers at checkout Secure checkoutEncrypted payment
Warranty Information

Vendor warranty summary

DV8 Offroad Warranty

At a glance: 1-year limited warranty against defects in materials and workmanship

This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.

Coverage by product

Product or component Coverage
All DV8-manufactured parts 1 year from purchase
Third-party products sold by DV8 Original manufacturer's warranty only
  • Original purchaser only — coverage does not transfer if you sell it.

What's covered

  • Defects in materials and workmanship on DV8-made parts
  • DV8 decides whether to repair or replace with an equivalent product

What's not covered

  • Installation, labor and freight
  • Normal wear and tear
  • Abuse, misuse, collision damage or neglect
  • Altered, modified or improperly installed products
  • Consequential losses such as vehicle downtime

How to make a DV8 Offroad warranty claim

  • Notify DV8 within one month of discovering the defect
  • Return the part to DV8 at your expense within the 1-year period
  • DV8 inspects it and repairs or replaces if the defect is confirmed

DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support

Bought it from NVMOS? Start with us.

Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.

Shop DV8 Offroad at NVMOS

See all DV8 Offroad products, lead times and FAQs →

Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.

About the brand

DV8 Offroad

DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.

Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs

DV8 Offroad warranty: 1-year limited warranty against defects in materials and workmanship. Read the full summary

Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.


DV8 Offroad 60 Amp Wire Harness with Switch and DTP Connector (UNWH-01)

This is the harness DV8 built for its 20-inch Elite Series Dual Row LED Light Bar. The light end is a Deutsch Power (DTP) connector that plugs straight into that bar, and the circuit runs on 12 AWG wire through a 60-amp relay to a metal switch with a red indicator that lights when the harness is on.

Mind the limits. The harness handles one 20-inch dual row bar because of power limitations, and that bar is the only DV8 light that is plug-and-play with it. Add DV8's 4-Way DT Plug Harness and the same harness can run other Elite combinations, listed in the table below.

Why it works
Made for the 20-inch dual rowThe DTP connector plugs directly into DV8's 20-inch Elite dual row bar, with no splicing or adapters.
Heavier wire15 feet of 12 AWG wire and a 60-amp relay are sized for the load of a dual row bar.
Switch you can readThe 3/4-inch round metal switch has a red indicator so you can tell at a glance when the lights are live.
ExpandablePaired with the 4-Way DT Plug Harness, it can drive pods and single row bars in several combinations.
Specifications
Spec Detail
Part number UNWH-01
Connector Deutsch Power (DTP)
Wire 15 ft, 12 AWG
Plug lead 9 ft
Relay 60-amp
Switch 3/4-inch round metal, black, red on indicator
Plug-and-play with One DV8 20-inch Elite Series LED Dual Row Light Bar only
With 4-Way DT Plug Harness 1 to 4 Elite pod lights; or one 20-inch Elite single row bar with 2 Elite pods; or one 13-inch Elite single row bar with 2 Elite pods
Install About 2 hours; install guide available
Frequently asked questions
Can I run two 20-inch dual row bars on it?

No. Because of power limitations the harness can only be used with one 20-inch Elite Series LED Dual Row Light Bar.

Will it plug into other DV8 lights?

Only the 20-inch Elite dual row bar is plug-and-play. For pods or single row bars, pair it with DV8's 4-Way DT Plug Harness.

What can I run with the 4-Way DT Plug Harness?

One to four Elite pod lights, one 20-inch Elite single row bar with two Elite pods, or one 13-inch Elite single row bar with two Elite pods.

How long does installation take?

DV8 estimates about two hours, depending on experience, and provides an installation guide.

Install guides & documents

Multi-column

Minimalist icon of three people for social, community, or group activities
Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Simple black and white credit card icon for payment or checkout options
Financing Available

Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

black and white envelope mail icon for email or newsletter sign up
Contact Us

Have a question? Just send us an e-mail at support@nvmos.com