2024-2026 Toyota Tacoma & 4Runner | Rear Shock & Link Skid Plates
Warranty Information
Vendor warranty summary
DV8 Offroad Warranty
At a glance: 1-year limited warranty against defects in materials and workmanship
This is DV8 Offroad's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All DV8-manufactured parts | 1 year from purchase |
| Third-party products sold by DV8 | Original manufacturer's warranty only |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials and workmanship on DV8-made parts
- DV8 decides whether to repair or replace with an equivalent product
What's not covered
- Installation, labor and freight
- Normal wear and tear
- Abuse, misuse, collision damage or neglect
- Altered, modified or improperly installed products
- Consequential losses such as vehicle downtime
How to make a DV8 Offroad warranty claim
- Notify DV8 within one month of discovering the defect
- Return the part to DV8 at your expense within the 1-year period
- DV8 inspects it and repairs or replaces if the defect is confirmed
DV8 Offroad contact: Phone: 855-680-9595 · Email: sales@dv8offroad.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DV8 Offroad, and help it along either way.
Shop DV8 Offroad at NVMOS
883 Simulated Beadlock Wheel | Matte Bronze 20" 5x127
2021-2026 Ford Bronco | Adaptive Cruise Control Relocation Bracket
2021-2026 Ford Bronco | Digital Device Dash Mount
See all DV8 Offroad products, lead times and FAQs →
Disclaimer: The information on this page describes DV8 Offroad's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DV8 Offroad official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DV8 Offroad designs steel armor and accessories in Chandler, Arizona and Riverside, California. NVMOS carries their bumpers, skid plates, rock sliders, fender flares, MOLLE storage, racks and interior parts for Jeep Wrangler and Gladiator, Ford Bronco, and a growing list of Toyota, Ford, GM and Ram trucks.
Based in: Chandler, Arizona · Designed in: Chandler, AZ & Riverside, CA · Lead time: In-stock ships in 24–48 hrs
Shop all 493 DV8 OffroadWarrantyAll brands
Warranty terms are set by DV8 Offroad, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
DV8 Offroad Rear Shock and Link Skid Plates for 2024+ Tacoma and 4Runner
On the 4th Gen Tacoma and 6th Gen 4Runner the lower rear shock mount and link hang low enough to take hits on ledges. These 4mm steel guards cover them to prevent rock rash and bent or broken shocks.
Each guard is one piece with a drain hole at its lowest point so water, mud and sand do not collect. They bolt on with factory hardware and work with most aftermarket shocks; DV8 has verified fit with OEM and Eibach shocks.
| Spec | Detail |
|---|---|
| Part number | SPTT1-06 |
| Fitment | 2024-2026 Toyota Tacoma, all trims incl. Trailhunter; 2025-2026 Toyota 4Runner |
| Unconfirmed fitment | Tacoma TRD Pro; 4Runner TRD Pro and Trailhunter |
| Wheel note | With factory wheels, a 1/2-inch wheel spacer may be needed |
| Material | 4mm steel |
| Finish | Micro-texture black powder coat |
| Installation | Bolt-on with factory hardware, no cutting, about 90 minutes |
| Warranty | DV8 one-year limited warranty from date of purchase, covering defects in workmanship and material |
Do I need wheel spacers?
If you run factory wheels, DV8 says a 1/2-inch wheel spacer may be needed.
Will they fit aftermarket shocks?
They are compatible with most aftermarket shocks. DV8 has verified fit with OEM and Eibach shocks.
Do they fit the TRD Pro or Trailhunter?
They fit the Tacoma Trailhunter. Fitment is unconfirmed for the Tacoma TRD Pro and the 4Runner TRD Pro and Trailhunter.
Will they trap mud?
Each guard has a drain hole at its lowest point to let water, dirt and sand out.
Compatibility
| 2024-2026 Toyota Tacoma | Fitment is unconfirmed for TRD Pro. All other trims, including Trailhunter, fit. |
|---|---|
| 2025-2026 Toyota 4Runner | Fitment is unconfirmed for TRD Pro & Trail Hunter editions |
Install guides & documents
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
More for your Toyota 4Runner
Picked from the 1533 parts we carry for the Toyota 4Runner, matched to 2024–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com






















































