2021-2026 Ford F-150 Raptor/Raptor R Bomber Front Bumper (Rigid)
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Addictive Desert Designs Warranty
At a glance: 1-year limited warranty on manufactured parts against defects in materials and workmanship
This is Addictive Desert Designs's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| All ADD-manufactured parts (bumpers, skids, fairleads, etc.) | 1 year from date of purchase |
| Powder coat / finish | Not separately addressed (falls under the 1-year policy) |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Defects in materials or workmanship found within one year of purchase
- ADD's obligation is limited to the cost of the product itself (repair or replace the part)
What's not covered
- Installation or labor costs
- Freight / shipping charges
- Normal wear and tear
- Damage from abuse, misuse, collisions or accidents
- Parts that were altered, modified, poorly cared for or installed incorrectly
- Damage from negligence, improper maintenance or unauthorized repair
- Consequential costs such as vehicle downtime, delays or mileage
How to make a Addictive Desert Designs warranty claim
- Notify ADD within one month of discovering the defect
- Return the defective part to ADD at your own expense while still inside the 1-year window
- ADD inspects the part to confirm the defect was not caused by misuse, accident or alteration before repairing/replacing
Addictive Desert Designs contact: Phone: (855) 233-8992 or (480) 671-0820 · Email: sales@addictivedesertdesigns.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Addictive Desert Designs, and help it along either way.
Shop Addictive Desert Designs at NVMOS
2021-2026 Ford Bronco Digital Device Dash Mount
2021-2026 Ford Bronco Adaptive Cruise Control Relocation Bracket in Hammer Black
2021-2026 Ford F-150 Adaptive Cruise Control Relocation Bracket
See all Addictive Desert Designs products, lead times and FAQs →
Disclaimer: The information on this page describes Addictive Desert Designs's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Addictive Desert Designs official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Addictive Desert Designs (ADD) builds steel bumpers, chase racks and skid plates in Chandler, Arizona. NVMOS carries ADD bumpers, mounts, racks and the small brackets that keep factory sensors working, for Ford, RAM, GM, Toyota and Jeep trucks that need to carry a winch, lights and a little more abuse.
Based in: Chandler, Arizona · Made in: USA (Chandler, Arizona) · Founded: 2007 · Lead time: Many items in stock; some new releases 4–6 weeks
Shop all 326 Addictive Desert DesignsWarrantyAll brands
Warranty terms are set by Addictive Desert Designs, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Bomber Front Bumper (Rigid) — 2021-2026 Ford F-150 Raptor and Raptor R
This Bomber front bumper is set up for four RIGID 360 6-inch lights in the center, with cube light mounts behind each side panel. It sits flush with the front of the truck, follows the valance and fender lines, and comes in lighter than the factory bumper.
Plate steel and aluminum panels with a full 3/16-inch aluminum skid plate, built in Chandler, Arizona.
| Spec | Detail |
|---|---|
| Part number | F210014110103 |
| Fitment | 2021-2026 Ford F-150 Raptor and Raptor R |
| Construction | Plate steel; aluminum panels; 3/16 in aluminum skid plate |
| Finish | Hammer black powder coat; satin black panels and skid |
| Lighting | Four RIGID 360 6 in mounts; cube light mount behind each side panel |
| Included | Bumper; shutter motor bracket |
| Retains | OEM tow hooks and parking sensors |
| Sold separately | ACC relocation bracket |
| Install | Fully bolt-on |
| Made in | Chandler, Arizona, USA |
Will adaptive cruise control still work?
ACC-equipped trucks require the Adaptive Cruise Control relocation bracket, sold separately.
Is it compatible with an upgraded intercooler?
Yes. It works with the ADD Raptor Intercooler Kit (IC1650KIT), which requires the Shutter Motor Relocation Kit, and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA). 2024 and newer trucks using the intercooler kit need an additional shutter motor relocation kit.
Are the RIGID lights included?
No. The bumper has mounts for four RIGID 360 6-inch lights, which are sold separately.
Videos
Install guides & documents
Complete your F-150 Raptor build
More parts that fit your F-150 Raptor and pair well with this one — matched and ready to install.
$2,598.98
$1,998.98
$2,198.98
$2,198.98
$3,098.98
More for your Ford F-150 Raptor
Picked from the 112 parts we carry for the Ford F-150 Raptor, matched to 2021–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
