Chevrolet Silverado Front Bumper Guide: 1500 and HD by Generation
A Silverado front bumper has to fit three things: your model year, your engine and the driver aids in the nose of your truck. Get the generation right first, then decide if you want a winch, then check what each listing says about parking sensors, the front camera and adaptive cruise.
Short answer: Match the bumper to your exact generation (2007-2013, 2014-2018, 2019-2021 or 2022 and newer for the 1500; HD years differ), read the engine exclusions, and confirm sensor, camera and adaptive cruise support on the product page. Pick a winch-ready bumper only if you plan to run a winch. If you just want to lose the chrome, a stick-on cover is the simpler path.
Winch-ready or non-winch
A winch-ready bumper has a reinforced center section or a hidden mount. It usually adds weight and often comes with more engine and fairlead rules.
Some bumpers are winch-ready out of the box. Others take an add-on. The ADD Winch Kit for the Stealth Fighter front bumper bolts to the 2022-2026 Stealth Fighter, and ADD says it handles winches from the 8,000 lb class up to a 12,000 lb WARN Evo. On the HD, the AEV Winch Installation Kit is made for the AEV bumper and the COMEUP SOLO 12.5rs winch. The winch itself is never included in these listings.
Fairleads matter too. DV8 says its 1500 Spec Series bumpers do not work with roller fairleads, and recommends a hawse fairlead with steel cable on the 2019-2021 version. Westin lists a recessed hawse fairlead on its full-width 1500 bumper.
Sensors, camera and adaptive cruise
Late-model Silverados can have front parking sensors, a front camera and an adaptive cruise radar in the bumper area. A bumper either keeps them, needs a kit, or blocks them. "Provisions for factory sensors" is not the same as "keeps adaptive cruise." The table below shows what each 2019-and-newer 1500 listing states.
| Bumper (1500) | Years | Winch | Sensors / camera / ACC per listing |
|---|---|---|---|
| ADD Stealth Fighter | 2022-2026 | With separate ADD kit | Keeps drive assist sensors, parking sensors, ACC; loses fog lights |
| ADD Black Label | 2022-2026 | Not stated | Keeps parking sensors, ACC with no relocation bracket; Super Cruise compatible |
| ADD Stealth Fighter ZR2 | 2022-2026 ZR2 | Optional hidden kit | ACC compatible; sensor cutouts on 2025-2026 version only |
| DV8 Spec Series | 2022-2025 | Hidden mount | Keeps parking sensors, front camera, ACC; not for Super Cruise |
| Westin Pro-Series Full Width | 2023-2026 | Up to 12,000 lb | Provisions for factory sensors |
| ADD Stealth Fighter Winch | 2019-2021 | Built-in mount | Parking sensor cutouts, plugs for non-sensor trucks |
| DV8 Spec Series | 2019-2021 | Hidden mount | Keeps parking sensors; not for Super Cruise |
| Fishbone Rockfish Winch | 2019-2021 | 10 x 4.5 in. pattern | Works with all OE sensors |
| Body Armor 4x4 Ambush | 2019-2022 | Non-winch | OE sensor compatible |
Silverado 1500 front bumpers by generation
Bumpers do not cross generations, and a mid-cycle refresh can change the front end. Confirm years on the product page.
2007-2013 Silverado 1500
The Fishbone Offroad front bumper for 2007-2013 is cold-rolled steel, and Fishbone lists it as accepting up to a 12,000 lb winch. For a non-winch option, the Body Armor 4x4 Eco Series 2007-2013 uses 1/8 in. steel plate, is listed as OE sensor compatible and comes with a license plate bracket. Body Armor lists no D-ring mounts on that one, so plan recovery points elsewhere.
2014-2018 Silverado 1500 (2016 refresh)
Chevy reshaped the front end for 2016, so 2014-2015 and 2016-2018 bumpers are usually separate parts. Body Armor makes two Eco Series bumpers: the Body Armor 4x4 Eco Series 2014-2015 and the Body Armor 4x4 Eco Series 2016-2018. Both are non-winch, bolt-on and OE sensor compatible, with room for a 20 in. dual-row bar and four cube lights.
For a winch, the Fishbone Offroad Rockfish for 2016-2018 is 11-gauge steel with 1/4 in. reinforcements, a 10 x 4.5 in. winch pattern and support for all OE sensors. Fishbone notes fender liner trimming is required. The Westin Pro-Series 2016-2019 takes most winches from 8,000 to 12,000 lb. Note that the 2019 model year also had the older-body Silverado 1500 LD, so confirm which 2019 truck a listing means.
2019-2021 Silverado 1500
Engine exclusions are the big catch here. The ADD Stealth Fighter Winch bumper does not fit diesel trucks or the 2.7L turbo. The Fishbone Rockfish Winch bumper has the same two exclusions and needs fender liner trimming. The DV8 Spec Series 2019-2021 excludes diesel, 2.7L TurboMax high output and Super Cruise trucks; DV8 lists it as bolt-on with no cutting, about 4 hours.
Diesel owners have options. The non-winch ADD Stealth Fighter 2019-2021 is listed for gas and diesel, with optional sensor cutouts and hole plugs included. The Body Armor 4x4 Ambush non-winch needs an additional shroud on diesel trucks, and the matching Body Armor intercooler shroud is listed for 2020-2023 diesel trucks, so confirm your year. The Westin Pro-Series 2019-2022 is for gas trucks only and excludes the 2019 LD.
2022 and newer Silverado 1500, including ZR2
For 2022 the 1500 got a new front end, while the older body carried over briefly as the 2022 Silverado LTD. ADD lists the LTD as excluded from its Stealth Fighter, so check which 2022 truck you have. Listings that run 2019-2022 do not say which 2022 body they fit; confirm before you order.
The ADD Stealth Fighter 2022-2026 includes a front skid plate and excludes diesel, 2.7L, LTD, ZR2 and EV trucks. ADD recommends trimming the inner fender liners. The ADD Black Label 2022-2026 is a 3-piece plate steel bumper that ADD lists as Super Cruise compatible; diesel trucks need ADD shutter motor brackets. The DV8 Spec Series 2022-2025 includes a front skid plate and requires minor cutting, about 5 hours per DV8. It excludes ZR2, 2.7L TurboMax, diesel and Super Cruise trucks. The title says 2022-2025 and the description 2022-2026, so confirm the year on the product page. For a full-width look with a winch, the Westin Pro-Series Full Width 2023-2026 starts at 2023.
The ZR2 needs its own bumper. The ADD Stealth Fighter ZR2 comes in two versions: 2022-2024 without sensor cutouts and 2025-2026 with them. It does not fit diesel ZR2s. If you keep the factory ZR2 bumper and add bigger tires, the Peak Suspension front bumper spacer is listed for 2022+ Silverado 1500 ZR2; the listing says the spacers move the bumper forward slightly for more tire clearance at full lock. Tire and lift planning is covered in our Silverado lift kit guide.
Silverado HD 2500/3500 front bumpers
HD trucks use different front ends from the 1500, so never cross-shop. Many HD listings also cover the Sierra HD with shorter years, so read the Chevy range.
2011-2019 Silverado HD
The Westin HDX Bandit 2011-2014 and Westin HDX Bandit 2015-2019 are diamond plate bumpers with a grille guard built in, 9,500 lb bow shackle mounts and no winch mount. Factory tow hooks cannot be reused. For a winch on 2015-2019, the Westin Pro-Series HD 2015-2019 fits most 8,000-12,000 lb winches.
2020-2023 Silverado HD
The DV8 Spec Series HD 2020-2023 takes up to a 12,000 lb winch, ties its D-ring mounts into the frame and keeps factory parking sensors. The Westin Pro-Series HD 2020-2023 is winch capable, and the Westin Pro-Mod HD 2020-2023 is a modular bumper that takes a 40 in. light bar. The Westin HDX Bandit 2020-2023 adds a 2 in. receiver but will partially block a front camera.
2024 and newer Silverado HD
| Bumper (HD) | Winch | Sensors / camera / ACC per listing | Install note |
|---|---|---|---|
| ADD Bomber HD | Heavy-duty mount | Keeps parking sensors and ACC | Fully bolt-on |
| ADD Phantom | Integrated hidden mount | Keeps OEM parking sensors | Fits ZR2 too |
| DV8 Spec Series HD | Up to 12,000 lb | Keeps parking sensors and ACC; loses fog lights | Minor inner fender trimming |
| AEV Front Bumper | With AEV winch kit | Front Park Assist and factory fog lights | Minor wheel liner changes |
| Westin Pro-Series Full Width | Up to 12,000 lb | Provisions for factory sensors | Not stated |
| Westin HDX Bandit | No winch mount | Factory camera compatible | Not stated |
Bull bars and grille guard bumpers
A bull bar adds a tube hoop in front of the bumper for light mounting and a little more nose protection. The DV8 Spec Series Bull Bar is a 1.5 in. steel tube that bolts onto select DV8 Spec Series bumpers. For the Silverado, DV8 lists only the 2020-2023 Silverado HD Spec Series bumper (FBCS2-03). It mounts a 20 in. bar, a 13 in. bar or 10 in. lights, installs in about an hour with no cutting, and can partially block a front camera.
If you want full grille and headlight coverage, look at the Westin HDX Bandit line above. Those are complete bumpers with the guard built in, not add-ons. Check your state's rules on lights and bumper height before adding a hoop or light bar up front.
Chrome-delete covers: the non-replacement option
If your factory bumper is straight and you only hate the chrome, a cover may be all you need. These are plastic overlays that stick over the factory bumper with 3M tape. They are not bumpers. Ecoological states plainly that BumperShellz should not be used as a replacement for the factory bumper. They add no recovery points and no winch mount.
- Ecoological BumperShellz 2007-2013: fits 1500 2007-2013 and HD 2500/3500 2007-2010. A quantity of 1 is the center cover only.
- Ecoological BumperShellz 2014-2015 and Ecoological BumperShellz cap kit 2016-2018: TPO and ABS plastic for the 1500.
- Ecoological BumperShellz 2019-2021: driver, passenger and center covers with a quantity of 1, using tape plus factory fasteners.
- Ecoological BumperShellz 2022-2026, AJT Design cover for WT, LT, Custom and Custom Trailboss and AJT Design cover for LTZ, RST, High Country and Trailboss: trim matters on 2022 and newer, so pick the right version.
Ecoological lists gloss black, matte black, gloss white and paintable ABS, plus paint-to-match. For painted parts it recommends a dry fit before removing the tape backing. For the full rundown on trim, grille and badge overlays, see our chrome delete guide.
What NVMOS carries
- ADD Stealth Fighter, 2022-2026 Silverado 1500: skid plate included; winch via separate ADD kit
- ADD Black Label, 2022-2026 Silverado 1500: ADD lists Super Cruise compatible, keeps ACC
- ADD Stealth Fighter ZR2, 2022-2026 Silverado 1500 ZR2: two versions by sensor cutouts
- DV8 Spec Series, 2022-2025 Silverado 1500: hidden winch mount; keeps camera and ACC
- Westin Pro-Series Full Width, 2023-2026 Silverado 1500: most winches up to 12,000 lb
- ADD Stealth Fighter Winch, 2019-2021 Silverado 1500: no diesel or 2.7L turbo
- Fishbone Offroad Rockfish Winch, 2019-2021 Silverado 1500: works with all OE sensors
- Body Armor 4x4 Ambush Non-Winch, 2019-2022 Silverado 1500: diesel needs add-on shroud
- Fishbone Offroad Rockfish, 2016-2018 Silverado 1500: winch compatible, 11-gauge steel
- Body Armor 4x4 Eco Series, 2014-2015 Silverado 1500: non-winch, OE sensor compatible
- Fishbone Offroad Front Bumper, 2007-2013 Silverado 1500: accepts up to a 12,000 lb winch
- ADD Phantom Winch, 2024+ Silverado 2500/3500: hidden winch mount, fits ZR2
- DV8 Spec Series, 2020-2023 Silverado 2500HD/3500HD: up to 12,000 lb winch
- Westin HDX Bandit, 2015-2019 Silverado 2500HD/3500HD: grille guard built in, no winch mount
- Ecoological BumperShellz, 2019-2021 Silverado 1500: chrome-delete overlay, not a bumper
Browse by category: off-road front bumpers, front bumper accessories, Chevrolet Silverado parts, Chevrolet Silverado HD parts, Addictive Desert Designs, DV8 Offroad, Fishbone Offroad, eCOOLogical, AJT Design, shop by vehicle, current lead times and vendor warranty policies. For the rest of the truck, start with our Silverado accessories guide.
Shop Chevrolet Silverado parts →
Frequently asked questions
Will a 2019-2021 Silverado 1500 bumper fit a 2022 or newer truck?
Usually not. The 2022 refresh changed the front end. DV8 says its 2019-2021 Spec Series bumper does not fit 2022 and newer trucks. The 2022 Silverado LTD kept the older body, so confirm which 2022 truck you have and check the listing.
Can I keep adaptive cruise control with an aftermarket bumper?
Some bumpers keep it and some do not. ADD lists adaptive cruise as retained on its 2022-2026 Stealth Fighter and Black Label, and DV8 lists it on its 2022-2025 Spec Series and 2024-2026 HD Spec Series. Check the exact listing for your year before you order.
Do I need a winch-ready bumper?
Only if you plan to run a winch. A non-winch bumper such as the Body Armor 4x4 Eco Series or Ambush skips the winch mount entirely. If you might add a winch later, pick a winch-ready bumper or one with an add-on winch kit now.
Which bumpers fit a diesel Silverado 1500?
Many do not. On 2019-2021 trucks, ADD lists its non-winch Stealth Fighter for gas and diesel, and Body Armor says its 2019-2022 Ambush needs an additional shroud on diesel trucks. On 2022 and newer, ADD says the Black Label needs separate shutter motor brackets on diesel trucks.
Does a bull bar block the front camera?
It can. DV8 says its Spec Series Bull Bar can partially block a front camera, and Westin says the 2020-2023 HDX Bandit HD bumper will partially block a camera if equipped. Westin lists its 2024-2026 HDX Bandit HD bumper as compatible with the factory camera.
Is a chrome-delete cover the same as a new bumper?
No. Covers like BumperShellz are plastic overlays that stick over the factory bumper with 3M tape. Ecoological says they should not be used as a replacement for the factory bumper. They change the look, but add no recovery points or winch mount.
Will I need to cut or trim anything?
It depends on the bumper. Some, like the ADD 2019-2021 Stealth Fighter and the DV8 2019-2021 Spec Series, are listed as no cutting. Others call for fender liner trimming or minor cutting, such as the Fishbone Rockfish and the DV8 2022-2025 Spec Series. Plan for it before install day.
Does a 1500 bumper fit a 2500HD or 3500HD?
No. The HD trucks have different front ends, so they need HD-specific bumpers. The one cross-over in this guide is the Ecoological 2007-2013 cover, which lists 1500 trucks from 2007-2013 and HD trucks from 2007-2010.
Not sure what fits your truck? Call a real person at (920) 249-7744 or send us a message, and we will help you sort it out.






