Employee owned & operated.

Need Help? Call us today at 1-920-783-8100

Goose Gear  |  SKU: 1560-GGR-WC

Goose Gear Jeep Gladiator 2019-Present JT 4 Door - Second Row Seat Delete Plate System - High Platform

$695.00
Shipping calculated at checkout.


Current Lead Times

Agreeing to our terms and conditions on your order means you are acknowledging the below.  Placing an order allocates product to you, however there may be a manufacturer's lead-time or back-order.  We frequently make changes to the below as brands provide us updates. 

* Made-to-order products are non-refundable.  Cancellations prior to shipping may be subject to 10-15% cancellation fees.  These brands are noted with (*).

  

C4 Fabrication *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Front Bumpers have a current lead time of up to 14 weeks production time.

Rear Bumpers have a current lead time of up to 14 weeks production time.

Lo Pro Bumpers have a current lead time of up to 6 weeks production time

Rock Sliders have a current lead time of up to 14 weeks production time.

Skid Plates have a current lead time of up to 12 weeks production time.

Hatch Ladder ships within 4 weeks.

Bed Racks have a current lead time of 6-8 weeks.

For any other product, please reach out for current lead times.

 

Cali Raised *

Rock Sliders are 2-4 weeks raw, 4-6 weeks coated.

Bed Racks are 1-2 week lead time.

Light Bars are 7-10 day ship time.

Molle Panels 3-6 weeks lead time.

 

CBI Offroad Fab *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Bumpers
Steel Front Bumpers | 6+ Weeks
Aluminum Front Bumpers | 4+ Weeks
Rear Bumpers | 8+ Weeks
Covert Bumpers | 4 Weeks

Racks & Bars
Bed Racks | 4 Weeks
Bed Bars | 1 Week
Prinsu Roof Racks | 1 Week

Rock Sliders
Rock Sliders | 4 Weeks

Skid Plates
Skid Plates | 4 Weeks

Accessories
Ditch Light Brackets | 1-2 Weeks
CBI Accessories | 1-2 Weeks
Prinsu Accessories | 1-2 Weeks

For any other product, please reach out for current lead times. 

 

Goose Gear *

Goose Gear made-to-order products have the following lead times:

Plate Systems: minimum 10 weeks

Modules and Cabinets: minimum 14 weeks

Please reach out for any questions.

 

KC HiLiTES

Roof Racks - due to an increased amount of orders, please allow for up to 8 weeks on shipments.
 

Partner Steel *

Partner Steel is currently caught up and has no lead time!

 

PEAK Engineering

PEAK products ship direct to you from PEAK, lead times vary by product. Ship times can vary from a few day to several weeks.

If you have any questions, please contact us 

 

Prinsu*

Prinsu Roof Racks & Top Racks | 1-3 Weeks

CBI Bed Bars | 1 Week

CBI Bed Racks | 4 Weeks

Prinsu Accessories | 1-2 Week

For any other product, please reach out for current lead times.

Purchases made can be returned for any reason within 30 days of purchase. All returned items must be in new, resalable condition and include original packaging and all hardware and accessories. The return shipping cost is the responsibility of the customer and a 20% restocking fee will apply. (If the product has been mounted or used it is not in new, resalable condition and will incur a 25% restocking fee) Items that were customized to ANY degree are not eligible for return.

After 30 days, non-warranty related returns are at the sole discretion of Aventuron and/or Prinsu Design Studio. A restocking fee of 20% will apply as long as the items have not been mounted or used. Return shipping costs are the responsibility of the customer. If the returned products are not in new, resalable condition – a repackaging, restocking, and/or damaged goods fee of up to 30% of the product value may be deducted from the refund.

Delivery and Shipping

Description

Jeep JT Gladiator Seat Delete High Platform for the Second Row in a 60% Passenger Side or in a 40% Driver’s Side version. Both can be combined to create a 100% second row seat delete.

Raised Seat Delete Platforms for the Jeep Gladiator.

Image shown reflects both 40% and 60% deletes installed. Each sold separately.

Jeep Gladiator JT Seat Delete High Platform for the Second Row in a 60% Passenger Side or in a 40% Driver’s Side version. Both can be combined to create a 100% second row seat delete.

Jeep Gladiator JT 40% Seat Delete High Platform – Driver Side

Jeep Gladiator JT 60% Seat Delete High Platform – Passenger Side

The 40% Seat Delete Platform is a bolt-in replacement for the driver’s second row seat. This platform has two (2) locking storage access door that provides access to an under-platform storage area that is approximately 9” high. Platform measures 21” wide x 36" long.

The 60% Seat Delete Platform is a bolt-in replacement for the passenger second row seat. This platform has two (2) locking storage access door that provides access to an under-platform storage area that is approximately 9” high. Platform measures 31” wide x 36” long.

The 60% Seat Delete Platform with Subwoofer is a bolt-in replacement for the passenger second row seat with subwoofer. This platform has one locking storage access door that provides access to an under-platform storage area that is approximately 9” high. Platform measures 31” wide x 29” long.

Both platforms feature front vertical enclosure and exterior facing infill side panel enclosures. All horizontal and vertical surfaces are constructed with Line-X covered Baltic Birch plywood. All necessary hardware to bolt the Seat Deletes into the vehicle using factory anchor points are included. No drilling into your vehicle is necessary.

The platforms provide points for anchors (available separately) to secure your storage and gear including dog crates, fridges, coolers, etc.

Both platforms allow for the front drivers and passengers side seats to be placed in their full back position, no loss of leg room for the front seats.

If you are removing just the 60% passenger side seat, unlike the Jeep JLU or JKU, the JT Gladiator does not require a seat delete bracket.

Specifications

Drivers side 40% delete weighs 24.6 Lbs.

Passengers side 60% delete weighs: 34 Lbs.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have A Question? Let Us Help!

Goose Gear

Goose Gear Jeep Gladiator 2019-Present JT 4 Door - Second Row Seat Delete Plate System - High Platform

From $695.00

Jeep JT Gladiator Seat Delete High Platform for the Second Row in a 60% Passenger Side or in a 40% Driver’s Side version. Both can be combined to create a 100% second row seat delete.

Raised Seat Delete Platforms for the Jeep Gladiator.

Image shown reflects both 40% and 60% deletes installed. Each sold separately.

Jeep Gladiator JT Seat Delete High Platform for the Second Row in a 60% Passenger Side or in a 40% Driver’s Side version. Both can be combined to create a 100% second row seat delete.

Jeep Gladiator JT 40% Seat Delete High Platform – Driver Side

Jeep Gladiator JT 60% Seat Delete High Platform – Passenger Side

The 40% Seat Delete Platform is a bolt-in replacement for the driver’s second row seat. This platform has two (2) locking storage access door that provides access to an under-platform storage area that is approximately 9” high. Platform measures 21” wide x 36" long.

The 60% Seat Delete Platform is a bolt-in replacement for the passenger second row seat. This platform has two (2) locking storage access door that provides access to an under-platform storage area that is approximately 9” high. Platform measures 31” wide x 36” long.

The 60% Seat Delete Platform with Subwoofer is a bolt-in replacement for the passenger second row seat with subwoofer. This platform has one locking storage access door that provides access to an under-platform storage area that is approximately 9” high. Platform measures 31” wide x 29” long.

Both platforms feature front vertical enclosure and exterior facing infill side panel enclosures. All horizontal and vertical surfaces are constructed with Line-X covered Baltic Birch plywood. All necessary hardware to bolt the Seat Deletes into the vehicle using factory anchor points are included. No drilling into your vehicle is necessary.

The platforms provide points for anchors (available separately) to secure your storage and gear including dog crates, fridges, coolers, etc.

Both platforms allow for the front drivers and passengers side seats to be placed in their full back position, no loss of leg room for the front seats.

If you are removing just the 60% passenger side seat, unlike the Jeep JLU or JKU, the JT Gladiator does not require a seat delete bracket.

Specifications

Drivers side 40% delete weighs 24.6 Lbs.

Passengers side 60% delete weighs: 34 Lbs.

Seat Delete

  • 40% Driver Seat Delete - High Platform
  • 60% Passenger Seat Delete - High Platform
  • 60% Passenger Seat Delete - High Platform With Factory Subwoofer

Shipping

  • Pick Up at Goose Gear
  • Include Shipping
View product