Need Help? Contact us at support@nvmos.com | (920)249-7744

PRINSU 5th Gen 4Runner Rear Window Accessory Panel

SKU:
$350.00
By Prinsu

Warranty Information

WHAT IS COVERED

  • Prinsu Design Studio will warranty all Prinsu Design Studio manufactured parts for a LIFETIME of use. This Limited Lifetime Warranty is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original retail purchaser sells or otherwise transfers the product to any other person. Each manufactured product must be installed following Prinsu Design Studio recommended fitment and installation procedures. Any customization or modification to the original product design, functionality, or use, either by said customer or by Prinsu Design Studio voids all warranty eligibility. It is the sole discretion of Prinsu Design Studio to determine warranty eligibility.
  • Prinsu Design Studio also sells products that complement our product line. When those products are purchased through the Prinsu Design Studio website or store location, we will honor ALL ORIGINAL MANUFACTURERS WARRANTIES.

*Products listed below have a limited warranty or are not covered under warranty

– Hardware Kits – 1 year, wearable part

 

WHAT ISN’T COVERED

  • Subject to the limitations and exclusions described in this warranty, Prinsu Design Studio will remedy defects in materials or workmanship by repairing or replacing, at its option, a defective product without charge for parts or labor. In addition, Prinsu Design Studio may elect, at its option, not to repair or replace a defective product but rather issue to a purchaser a refund equal to the purchase price paid for the product or a credit to be used toward the purchase of a new Prinsu Design Studio product.
  • No warranty is given for defects caused by normal wear and tear, cosmetic rust, scratches, accidents, unlawful vehicle operation, products used for racing or competition, or modification of, or any types of repair of, a Prinsu Design Studio manufactured product.
  • The Prinsu Design Studio Warranty does not include the powder-coated finish.
  • No warranty is given for defects resulting from conditions beyond Prinsu Design Studio’s control including, but not limited to, misuse, neglect, overloading, improperly maintained or failure to assemble, mount or use the product in accordance with Prinsu Design Studio’s written instructions or guidelines included with the product or implied use made available to the purchaser.

 

DISCLAIMER OF LIABILITY

Repair or replacement of a defective product or the issuance of a refund or credit (as determined by Prinsu Design Studio) is a purchaser’s exclusive remedy under this warranty. 

Damage to a purchaser’s vehicle, cargo, and/or to any other person or property is excluded.

This warranty is expressly made in lieu of any and all other warranties, express or implied, including the warranties of merchantability and fitness for a particular purpose.

Prinsu Design Studio’s sole liability to any purchaser is limited to the remedy set forth above. In no event will Prinsu Design Studio be liable for any lost profits, lost sales, or for any consequential, direct, indirect, incidental, special, exemplary, or punitive damages or for any other damages of any kind or nature. 

  • Please test fit product and verify all hardware and components are included before installation. CBI/Prinsu Offroad Fab will not cover any additional shipping or installation/uninstallation costs if fitment and components have not been verified prior to installation.
  • Any missing hardware or components must be reported within 90 days of receiving the product.

 

WARRANTY CLAIM SUBMISSION PROCESS

  • All CBI and Prinsu warranties require proof of purchase. A copy of the original invoice will be required to initiate a warranty claim. 
  • Warranty submissions must be submitted online using the form below. Phone submissions will not be accepted.
  • Once we enter your warranty claim in the system, you’ll get an RMA# (Return Merchandise Authorization number). When you receive your RMA#, please send the package to the address below.
  • When choosing a shipper to return warrantied products, keep in mind that CBI Offroad Fab cannot be held liable or responsible for items lost in transit. Please use a carrier that can provide tracking and insurance.
  • Please print your RMA clearly on the shipping label and the package. Thank you!
  • Please note that the purchaser may be responsible for the cost of mailing the product to CBI Offroad Fab.

*** WARNING: Neither the seller nor the manufacturer will be liable for any loss, damage, or injury directly or indirectly arising from the use of or inability to determine the use of these products. Before using, the user shall determine the suitability of the product(s) for its intended use(s), and the user shall assume all responsibility and risk in connection therewith.***

*** Does not fit Prinsu Pro Rack ***

Get More From Your Prinsu Rack With These Must-Have 4Runner Rear Window Accessory Panels for the 5th Gen Toyota 4Runner.

  • Designed specifically for 5th Gen 4Runners with Prinsu Roof Racks
  • Seamless mounting system with two reliable suction cups
  • Durable aluminum construction with sleek powder-coated finish
  • Versatile mounting options for Power Tanks, Maxtrax, QuickFists, Krazy Beaver Shovels, Rotopax, and more
  • Two-piece modular design makes swapping accessories a breeze

Maximize your overlanding capabilities and enhance your rig's style with Prinsu's rear window accessory panels. Perfectly contoured to fit your 4Runner, they help you utilize every inch of your Prinsu Rack for hauling essential gear and supplies. The secure suction-cup mounting keeps panels and accessories firmly in place, while the durable aluminum stands up to tough conditions.

With their versatile mounting options, you can customize your setup to fit your needs. Carry extra fuel, water, tools, and recovery gear without sacrificing interior cargo space. When you're ready for a change, the two-piece modular design makes swapping accessories quick and easy.

Get the most out of your overlanding adventures with these must-have rear window accessory panels designed specifically for 5th Gen 4Runners. Upgrade your rig and unlock new potential today!

*** Does not fit Prinsu Pro Rack ***

PRINSU 5th Gen 4Runner Rear Window Accessory Panel

Additional Information

PRINSU 5th Gen 4Runner Rear Window Accessory Panel

Multi-column

Specifications

  • Mounts to Prinsu Rack on top
  • Mounts to the window using two suction cups
  • Powder Coated Black
  • Lightweight

Features

  • Available for driver and passenger side windows
  • All aluminum construction
  • A multitude of mounting options for accessories
  • Fits Power Tanks, Maxtrax Mini‚Äôs, Rotopax, Dmos Shovel Mounts, Quick Fists, etc
  • Two-piece design for easily switching out accessories
  • Lifetime Warranty

Prinsu Design Studio

The Original Roof Rack.

Multi-column

Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Financing Available

Buy now and pay later with Affirm.

Contact Us

Have a question? Just send us an e-mail at support@nvmos.com