Hondo Garage Juicer - Wireless Charging Upgrade

Add an extremely rugged wireless charging solution to your existing perfect Squeeze phone mount. Bolts on for a robust installation that won't let you down, even in the roughest terrain.

Our wireless charger was developed in collaboration with Moto Power Puck. We embed the MPP circuit board in a waterproof, vibration-proof housing designed for extremely harsh environments (like motorcycle handlebars and race truck dashboards). Designed to be hard-wired directly to a 12v power supply.

Installation Instructions

1. Remove the gripper posts. If the post comes off the set screw, remove the set screw as well. Usually the post and the screw come off together. They're loc-tited on so you may need to use pliers, which is why the upgrade comes with new posts.
2. Install the bottom adapter first (the one without the puck) by threading the two allen bolts preinstalled in the adapter into the now empty gripper post holes. We recommend a tiny amount of blue loc-tite on the screw. You can get an allen key in there without removing the new gripper posts. Just tighten them a little past snug, no need to make them extra tight. The larger radius curve goes toward the puck, the smaller radius toward the click wheel.
3. Install the puck holder the same way.

When wiring it up, the charger needs a 12v input. Red is positive and black is negative (reversing the polarity can damage the puck). Don't cut off the small voltage reducer at the end of the cord. We recommend wiring this to an ignition-switched circuit so you don't drain the battery over time.

Note: Does not include Perfect Squeeze Phone Mount. This is just the Wireless charging retro fit kit. If you need the phone mount too, you can get it pre-assembled with the Juicer here.

Technical Specifications

• Input: 12v/3A (bare wire for connection to battery or auxiliary power supply)
• Output from charger: 5v/1A (wireless)
• Wireless Standard: WPC-Qi V1.2.2

Compatible Phones

This is a non-exhaustive list of compatible phones. Many additional phones also support wireless charging so if you don’t see it here, be sure to check the link below or your manufacturer’s website.

• Apple iPhone: 8, 8 Plus, X
• Samsung Galaxy: S9, S9+, Note 8, S8, S8+, S7, S7 Edge, Note 5, S6, S6 Edge
• LG: V30, G6 (US version only), G4 (optional), G3 (optional)
• Microsoft Lumia: 1520, 1020, 930, 929, 928, 920
• Google Nexus: 4, 5, 6, 7 (2013)
• BlackBerry: Priv