Employee owned & operated.

Need Help? Call us today at 1-920-783-8100

Goose Gear  |  SKU: 1027-GGR-WC

Goose Gear Jeep Wrangler 2007-2018 JKU 4 Door - Side Cubbies

$825.00
Shipping calculated at checkout.


Current Lead Times

Agreeing to our terms and conditions on your order means you are acknowledging the below.  Placing an order allocates product to you, however there may be a manufacturer's lead-time or back-order.  We frequently make changes to the below as brands provide us updates. 

* Made-to-order products are non-refundable.  Cancellations prior to shipping may be subject to 10-15% cancellation fees.  These brands are noted with (*).

  

C4 Fabrication *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Front Bumpers have a current lead time of up to 14 weeks production time.

Rear Bumpers have a current lead time of up to 14 weeks production time.

Lo Pro Bumpers have a current lead time of up to 6 weeks production time

Rock Sliders have a current lead time of up to 14 weeks production time.

Skid Plates have a current lead time of up to 12 weeks production time.

Hatch Ladder ships within 4 weeks.

Bed Racks have a current lead time of 6-8 weeks.

For any other product, please reach out for current lead times.

 

Cali Raised *

Rock Sliders are 2-4 weeks raw, 4-6 weeks coated.

Bed Racks are 1-2 week lead time.

Light Bars are 7-10 day ship time.

Molle Panels 3-6 weeks lead time.

 

CBI Offroad Fab *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Bumpers
Steel Front Bumpers | 6+ Weeks
Aluminum Front Bumpers | 4+ Weeks
Rear Bumpers | 8+ Weeks
Covert Bumpers | 4 Weeks

Racks & Bars
Bed Racks | 4 Weeks
Bed Bars | 1 Week
Prinsu Roof Racks | 1 Week

Rock Sliders
Rock Sliders | 4 Weeks

Skid Plates
Skid Plates | 4 Weeks

Accessories
Ditch Light Brackets | 1-2 Weeks
CBI Accessories | 1-2 Weeks
Prinsu Accessories | 1-2 Weeks

For any other product, please reach out for current lead times. 

 

Goose Gear *

Goose Gear made-to-order products have the following lead times:

Plate Systems: minimum 10 weeks

Modules and Cabinets: minimum 14 weeks

Please reach out for any questions.

 

KC HiLiTES

Roof Racks - due to an increased amount of orders, please allow for up to 8 weeks on shipments.
 

Partner Steel *

Partner Steel is currently caught up and has no lead time!

 

PEAK Engineering

PEAK products ship direct to you from PEAK, lead times vary by product. Ship times can vary from a few day to several weeks.

If you have any questions, please contact us 

 

Prinsu*

Prinsu Roof Racks & Top Racks | 1-3 Weeks

CBI Bed Bars | 1 Week

CBI Bed Racks | 4 Weeks

Prinsu Accessories | 1-2 Week

For any other product, please reach out for current lead times.

Purchases made can be returned for any reason within 30 days of purchase. All returned items must be in new, resalable condition and include original packaging and all hardware and accessories. The return shipping cost is the responsibility of the customer and a 20% restocking fee will apply. (If the product has been mounted or used it is not in new, resalable condition and will incur a 25% restocking fee) Items that were customized to ANY degree are not eligible for return.

After 30 days, non-warranty related returns are at the sole discretion of Aventuron and/or Prinsu Design Studio. A restocking fee of 20% will apply as long as the items have not been mounted or used. Return shipping costs are the responsibility of the customer. If the returned products are not in new, resalable condition – a repackaging, restocking, and/or damaged goods fee of up to 30% of the product value may be deducted from the refund.

Delivery and Shipping

Description

The Jeep Wrangler JKU Side Cubbies are designed for the 4 Door 2007-2018 Wrangler with usability in mind. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance these Side Cubbies are to be install in front of both roll bar locations in the rear cargo area. The Cubbies serve as a great way to square up the rear cargo area and create additional lockable storage compartments.

The JKU Side Cubbies are designed to bolt directly to a Goose Gear JKU Plate System, no drilling into your vehicle required. The Side Cubbies require the purchase and installation of the Jeep JKU Floor Plate.

Jeep's with a side mount subwoofer will have to remove the subwoofer and plastic trim for cubby installation.

On 2007-2010 models the rear door does not have a hinge like found on the later models. The hinge cutout is precut into the cubbies and on early model 2007-2010 models you will see the vehicle body through the precut hole.

* The set of aluminum rails depicted here are not included with the Side Cubbies. The design of the JKU Plate and Cubbies has been updated since this photo was taken, so these rails are no longer necessary for installation of the Cubbies.*


ÔªøLegacy SKU - PJKUCUBBY07-17

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have A Question? Let Us Help!

Goose Gear

Goose Gear Jeep Wrangler 2007-2018 JKU 4 Door - Side Cubbies

From $825.00

The Jeep Wrangler JKU Side Cubbies are designed for the 4 Door 2007-2018 Wrangler with usability in mind. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance these Side Cubbies are to be install in front of both roll bar locations in the rear cargo area. The Cubbies serve as a great way to square up the rear cargo area and create additional lockable storage compartments.

The JKU Side Cubbies are designed to bolt directly to a Goose Gear JKU Plate System, no drilling into your vehicle required. The Side Cubbies require the purchase and installation of the Jeep JKU Floor Plate.

Jeep's with a side mount subwoofer will have to remove the subwoofer and plastic trim for cubby installation.

On 2007-2010 models the rear door does not have a hinge like found on the later models. The hinge cutout is precut into the cubbies and on early model 2007-2010 models you will see the vehicle body through the precut hole.

* The set of aluminum rails depicted here are not included with the Side Cubbies. The design of the JKU Plate and Cubbies has been updated since this photo was taken, so these rails are no longer necessary for installation of the Cubbies.*


ÔªøLegacy SKU - PJKUCUBBY07-17

Shipping

  • Pick Up at Goose Gear
  • Include Ship
View product