KC HiLiTES FLEX ERA® 3 Dual-Mode SAE Fog Light Pocket Kit — Jeep JK/JL/JT Steel Bumpers (97149)

Street-legal fogs when you need them, off-road punch when you want it. The FLEX ERA® 3 Dual-Mode SAE kit drops straight into Jeep JK (’07–’18) and JL/JT winch-capable steel bumpers with included brackets and plug-in adapters. Run the SAE J583 fog beam on-road for wide, low-glare visibility, then flip to the high-output off-road mode when the trail starts. The Master Kit includes both Clear and Selective Yellow lenses so you can tune output for weather and preference. 

Why Jeep owners choose it

• Two beams, one kit — Compliant SAE fog pattern for pavement; Dual-Mode adds spot power off-road for reach and definition. 
• Clear or Selective Yellow — Swap lenses in minutes; yellow cuts back-glare in rain, snow, and dust. Factory-clean fit — Steel-bumper fog pocket brackets and
• H16 plug-and-play adapters keep wiring tidy—no cutting.Signature FE3 look &
• durability — Compact aluminum pods, serviceable lenses/bezels, and weather-sealed build for real trail use. 

What’s in the box

• (2) FLEX ERA® 3 Dual-Mode SAE LED pods (Clear lenses pre-installed)
• (2) Selective Yellow lenses
• (2) Jeep steel-bumper fog pocket brackets + round shrouds
• (2) H16 fog-light harness adapters (Jeep)
• Premium wiring harness with weatherproof connectors & 2-position switch (powers the off-road mode) 

Performance & key specs (per light)

• Output: 3,682 lm (SAE Fog) • 5,949 lm (Dual-Mode) at 5000K
• Candela / Beam distance: 9,440 cd / 84 m (Fog) • 19,984 cd / 124.6 m (Dual-Mode)
• Power / draw: 35W / 2.9A @12V (Fog) • 55W / 4.5A @12V (Dual-Mode)
• Voltage: 9–36V • Ingress: IP65 • Size: W 3.6" × H 3.5" × D 2.6" 

Fitment

• Jeep Wrangler JK (2007–2018) — Winch-Capable Steel Front Bumper (Rubicon, 10th Anniversary, Hard Rock).
• Jeep Wrangler JL (2018–2024) — Winch-Capable Steel Front Bumper (Rubicon, 392, select trims).
• Jeep Gladiator JT (2020–2024) — Winch-Capable Steel Front Bumper (Rubicon).
  Not for JL/JT plastic bumpers—use kit 97146 for premium plastic. Always verify bumper style before ordering. 

Install notes

Plug each pod into your Jeep’s factory fog circuit for SAE mode using the included H16 adapters. To enable the off-road high-power mode, connect the supplied harness and 2-position switch to a fused 12V source. Aim low for fog compliance; use Dual-Mode off-highway where permitted. Typical driveway install with basic tools.