Printed Series Stealth Topo Fuel Door Overlay - 2021+ Bronco
- Fits all Bronco (choose model below)
- Dries clear and lets your vehicle's paint shine through
- Optional color options
- Sold as a set of two (1 backup)
- Install video below
Printed Series Stealth Topo Fuel Door Overlay
Our printer has really allowed us to make a whole new range of products. Now we would like to introduce you to the printed series fuel door overlay. THEY ARE PRINTED ON CLEAR VINYL... this lets your vehicle's OEM paint become the background for the design.
You will receive two copies of this product. We just want you to have a good installation experience. Refer to the installation video.
Please send your design ideas for consideration if you would like to see new designs!
Recommended items:
These items can be found with a microfiber here.
Installation
Clean the application area and apply the vinyl using wet installation. Make sure the area is clean and free of dust, debris, dirt, Armor All, etc.
Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
Try doing the install in the shade so it doesn't heat up the vinyl rapidly. Please watch our video for a detailed installation.
Keep a dish of soapy water (1 or 2 drops of dish / hand soap with a couple cups of water) around. You will want to wet the fuel door and the back of the vinyl.
Also recommend using a felt tip squeegee. In this video we swap out the soapy water with a product called Rapid Tac. You can also use our pre filled bottles of StickerFab Application Fluid.
Removal
To remove after item has been installed for a while, please use Goo Gone and a clean towel / paper towel. This will dissolve the remaining adhesive. Be sure to rinse / wash the area after removal.
多列
加入我们的社区
有关 NVMOS 的所有信息，请在 Instagram 和 Facebook 上关注我们！
提供融资
先购买，稍后使用Affirm 付款。
联系我们
有问题？请发送电子邮件至support@nvmos.com
